Lexus ES300h Owner's Manual page 524

524
8-2. Steps to take in an emergency
Connect a positive jumper cable clamp to the positive (+) battery terminal
1
on your vehicle.
Connect the clamp on the other end of the positive cable to the positive (+)
2
battery terminal on the second vehicle.
Connect a negative cable clamp to the negative (-) battery terminal on the
3
second vehicle.
Connect the clamp at the other end of the negative cable to a solid, station-
4
ary, unpainted metallic point away from the 12-volt battery and any moving
parts, as shown in the illustration.
Start the engine of the second vehicle. Increase the engine speed slightly and
4
maintain at that level for approximately 5 minutes to recharge the 12-volt bat-
tery of your vehicle.
Open and close any of the doors of your vehicle with the power switch off.
5
Maintain the engine speed of the second vehicle and start the hybrid system
6
of your vehicle by turning the power switch to ON mode.
Make sure the "READY" indicator comes on. If the indicator does not come
7
on, contact your Lexus dealer.
Once the hybrid system has started, remove the jumper cables in the exact
8
reverse order from which they were connected.
Once the hybrid system starts, have the vehicle inspected at your Lexus dealer
as soon as possible.
ES300h_OM_OM33B71U_(U)