Lexus ES300h Owner's Manual page 204

204
4-5. Using the driving support systems
Changing settings of the pre-collision system
Enabling/disabling the pre-collision system
■
The pre-collision system can be enabled/disabled on
multi-information display.
The system is automatically enabled each time the power switch is turned to ON
mode.
If the system is disabled, the PCS
warning light will turn on and a mes-
sage will be displayed on the multi-
information display.
Changing the pre-collision warning timing
■
The pre-collision warning timing can be changed on
multi-information display.
The operation timing setting is retained when the power switch is turned off.
Far
1
The warning will begin to operate
earlier than with the default timing.
Middle
2
This is the default setting.
Near
3
The warning will begin to operate
later than with the default timing.
ES300h_OM_OM33B71U_(U)
(P. 91) of the
(P. 91) of the