Service Rules; Electrical Precautions - BOLIY PRO3600SI User Manual

2.3 Service rules

*Use genuine BOLIY or BOLIY-recommended parts and lubricants or their
equivalents. Parts that do not meet BOLIY design specifications may damage
the engine.
*Use the special tools designed for the product.
*Always install new gaskets, O-rings, etc. when reassembling components.
*Clean parts in cleaning solvent upon disassembly. Lubricate any sliding surfaces
before reassembly. After reassembly, check all parts for proper installation and
operation.
*Many screws used in this machine are self-tapping. Be aware that cross-
threading or over tightening these screws will strip the threads and ruin the
hole.
*Use only metric tools when servicing this engine. Metric bolts, nuts and screws
are not interchangeable with non metric fasteners. The use of incorrect tools
and fasteners will damage the engine.

2.4 Electrical precautions

*Hold the connector body to disconnect the connector. Do not disconnect by
pulling the wire harness. To disconnect the locking connector, be sure to unlock
first, and then disconnect.
*Check the connector terminals for bend, excessive extrusion, missing terminals,
or other abnormalities before connecting the connector.
*To connect, insert the connector as far as it goes. If the connector is a locking
type, be sure that it is locked securely.
*Check the connector cover for breakage and check whether the connector
female terminal is not opened excessively. Then, connect the connector securely.
Check the connector terminal for rust. Remove the rust using an emery paper
or equivalent material before connecting the connector.
*Set the harness clips in the specified places of the frame securely, and secure
the wire harnesses.
*Clamp the cables securely.
7