Roland M-5000 Reference Manual page 247

XI-MADI
The setting items shown below are displayed when an XI-MADI is
installed in the expansion slot.
STATUS
STATUS
STATUS
CH MODE
INPUT
BACKUP MODE
VIDEO IN
VERSION
* When making the XI-MADI a clock source, go to the WORD
CLOCK window and set the expansion slot where the XI-MADI is
installed to be the clock source.
* The MADI IN 1 connector and VIDEO SYNC IN connector can be
set to a clock source.
Displays the link status of the MADI IN 1/2
connector.
5 LINKED: Linked normally
5 LINKING: Establishing a connection, or
the unit's sampling rate differs from the
input signal.
5 UNLINKED: No MADI device is
connected, or no connection can be
established.
Sets the maximum number of MADI
channels to output.
You set this to correspond to the mode
setting of connected MADI equipment.
5 64
5 56
Selects the input connector.
5 OPTICAL
5 COAXIAL
5 AUTO: Automatically selects OPTICAL
or COAXIAL (with COAXIAL taking
precedence). The same input connector
remains selected until the input signal
ends.
When set to ON, the MADI IN/OUT
connectors 2 function as a backup of the
MADI IN/OUT connectors 1.
When set to OFF, the MADI IN/
OUT connectors 1 and 2 operate
independently.
Displays the status of the VIDEO SYNC IN
connector.
5 OK
5 NO SIGNAL
XI-MADI version information
REAC Applications and EXPANSION SLOT Settings
247