Denon AVR-S510BT Owner's Manual page 72

Contents Connections
Audio Delay
Compensates for incorrect timing between video and audio.
0 ms – 200 ms (Default : 0 ms)
0 "Audio Delay" settings are stored for each input source.
0 The "Audio Delay" settings can be set even if AUDIO DELAY + or AUDIO DELAY -
is pressed on the remote control unit.
Volume
Make volume settings.
o Scale
Set how volume is displayed.
0 - 98
(Default):
–79.5 dB – 18.0 dB:
Front panel Display
Playback
Display in the range 0 (Min) to 98.
Display ---dB (Min), in the range –79.5 dB
to 18.0 dB.
Rear panel
Settings
o Limit
Make a setting for maximum volume.
60 (–20 dB) / 70 (–10 dB) / 80 (0 dB)
Off (Default)
0 The dB value is displayed when the "Scale" setting is" –79.5 dB – 18.0 dB".
o Power On Level
Define the volume setting that is active when the power is turned on.
Last
(Default):
Mute:
1 - 98 (–79 dB - +18 dB): The volume is adjusted to the set level.
o Mute Level
Set the amount of attenuation when muting is on.
Full
(Default):
–40 dB :
–20 dB :
72
Remote
Tips Appendix
Use the memorized setting from the last
session.
Always use the muting on condition when
power is turned on.
The sound is muted entirely.
The sound is attenuated by 40 dB down.
The sound is attenuated by 20 dB down.
Index