Pairing With A Bluetooth Device - Denon AVR-S510BT Owner's Manual

Contents Connections

Pairing with a Bluetooth device

In order to enjoy music from a Bluetooth device on this unit, the Bluetooth
device must first be paired with this unit.
Once the Bluetooth device has been paired, it does not need to be paired
again.
1
Press Bluetooth to switch the input source to
"Bluetooth".
Bluetooth
Device
.
When using for the first time, the unit will go into the pairing mode
automatically and "Pairing Mode" will appear on the display of the
unit.
2
Activate the Bluetooth settings on your mobile device.
Front panel Display
Playback
OPTION Pairing
42
Rear panel
Settings
3
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
Connect to the Bluetooth device while "Pairing Mode" is being
displayed on the display of the unit.
Perform the connection with the Bluetooth device close to the unit
(about 3.3 ft/1 m).
4
When a number appears on the display of this unit,
check that it is the same number as that shown on the
screen of the Bluetooth device and then select "Pair"
for both the Bluetooth device and the unit.
At the end of the pairing, the device name appears on the display of
this unit.
5
See "Pairing with the Pairing Mode" (v p. 44) to pair
Bluetooth devices from the 2nd device onward.
0 Enter "0000" when the password is requested on the screen of the Bluetooth
device.
Remote
Tips Appendix
Index