Pairing With The Pairing Mode - Denon AVR-S510BT Owner's Manual

Contents Connections
o Operations accessible through the option
menu
"Pairing with the Pairing Mode" (v p. 44)
0
"Performing repeat playback (Repeat)" (v p. 51)
0
"Performing random playback (Random)" (v p. 51)
0
"Adjusting the tone (Tone)" (v p. 52)
0
"Displaying your desired video during audio playback (Video
0
Select)" (v p. 54)
Front panel Display
Playback Settings

Pairing with the Pairing Mode

Pair a Bluetooth device with this unit.
1
Activate the Bluetooth settings on your mobile device.
2
Press OPTION when the input source is "Bluetooth".
The option menu screen is displayed.
3
Use ui to select "Pairing Mode", then press ENTER.
The device will go into the pairing mode.
4
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
5
When a number appears on the display of this unit,
check that it is the same number as that shown on the
screen of the Bluetooth device and then select "Pair"
for both the Bluetooth device and the unit.
At the end of the pairing, the device name appears on the display of
this unit.
0 Enter "0000" when the password is requested on the screen of the Bluetooth
device.
0 Press and hold the Bluetooth button on the remote control for at least 3 seconds to
go into pairing mode.
44
Rear panel
Tips
Remote Index
Appendix