Center Image - Denon AVR-S510BT Owner's Manual

Contents Connections
o Dynamic Comp.
Compress dynamic range (difference between loud and soft sounds).
Auto:
Low / Medium / High:
Off:
0 "Auto" can only be set when Dolby TrueHD signals are input.
Front panel Display
Playback
Automatic dynamic range compression
on/off control according to source.
These set the compression level.
Dynamic range compression is always
off.
Rear panel
Settings
o Low Frequency
Adjust the low frequency effects level (LFE).
-10 dB – 0 dB (Default : 0 dB)
0 For proper playback of the different sources, we recommend setting to the
values below.
0 Dolby Digital sources : 0 dB
0 DTS movie sources : 0 dB
0 DTS music sources: -10 dB
o Center Image
Distributes the dialogue output from the center channel to the front left
and right channels and widens the sound image in the front.
0.0 – 1.0 (Default : 0.3)
0 You can set this when the sound mode is DTS Neo:6 in the "Music" mode.
0 The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
69
Remote
Tips Appendix
Index