Playing A Bluetooth Device - Denon AVR-S510BT Owner's Manual

Contents Connections

Playing a Bluetooth device

Check the following before you play back music.
The Bluetooth function of the Bluetooth device must be turned on
0
Pairing must be completed
0
1
Press Bluetooth to switch the input source to
"Bluetooth".
The unit will automatically connect to the most recently used
Bluetooth device.
2
Start playing the Bluetooth device.
The Bluetooth device can also be operated with the remote
0
control of this unit.
Front panel Display
Playback Settings
Operation buttons
1/3
8 9
ENTER
u i
0 When the power of this unit is turned on, the input source will be automatically
switched to "Bluetooth" if a Bluetooth device is connected.
0 English letters, numbers and certain symbols are displayed. Incompatible
characters are displayed as "." (period).
NOTE
0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth
device needs to support the AVRCP profile.
0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.
0 Depending on the type of Bluetooth device, this unit outputs audio that is coupled
to the volume setting on the Bluetooth device.
43
Rear panel
Tips
Playback / Pause
Skip to previous track / Skip to next track
(Press and hold) Fast-reverse / Fast-
forward
Playback / Pause
(Press and hold) Stop
Skip to previous track / Skip to next track
(Press and hold) Fast-reverse / Fast-
forward
Remote Index
Appendix
Function