1
2
3
4
5
6
7
8
9
10
11
12
13
A Smoke Alarm is an early warning device. Used correctly it
can give you and your family valuable extra time to escape.
When the alarm sounds, immediately evacuate the premises
before beginning any investigation.
9V
Battery
1. Install in the centre of the ceiling (if possible) using the
screws supplied (see section 5.0).
2. Connect battery: Connect battery snaps firmly (see figure
1). Press the test button and horn should sound.
3. When the battery is first connected the Alarm may sound
for 2-3 seconds and/or the red light may flash quickly for 10
seconds - this is normal.
4. The wireless interconnect will operate as received once
the batteries are connected. We strongly recommend
house coding your alarms to prevent interference from
neighbouring systems (see section 6)
5. Test weekly.
6. Proper protection usually requires more than one Smoke
Alarm.
7. If the Ei3105RF Smoke Alarm beeps without the red light
flashing at the same time then clean the unit, as this is the
automatic test feature indicating the chamber is degraded.
Table of Contents
1. READ THIS FIRST
Figure 1: Connecting the Battery
Battery Connectors
2
Page
2
3
3
5
7
9
10
13
14
16
17
17
19