Related Manuals for DynaColor DynaGuard 090 series
Summary of Contents for DynaColor DynaGuard 090 series
- Page 1 DynaGuard 090 Series DVR User’s Manual 00P3DG090DSEA2 Version 1.2 00P3DG090DSEA2...
- Page 2 User’s Manual...
- Page 3 User’s Manual Caution and Preventive Tips • Take care not to drop the unit or subject the unit to major shocks or jolts. • Do not place this unit on an unstable stand, bracket or mount. • This unit is designed for indoor use only. Do not place the unit near water or in other extremely humid conditions.
-
Page 4: Important Information
User’s Manual Important Information Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. -
Page 5: Table Of Contents
User’s Manual Table of Content 1. Overview ........................7 Product Key Features ..................8 Product Application Diagram................9 2. System Setup........................9 Position the Unit....................9 Selecting Video Format..................10 Connecting Devices to the Unit................10 Rear Panel Connections..................11 3. General System Setup ....................14 Front Panel Introduction ..................15 3.1.1 LED Definition ..................15 3.1.2... - Page 6 User’s Manual 4.4.2 To Export Normal Video................30 4.4.3 To Export Event Video ................31 Deleting Recorded Video ...................31 Dome Control.....................32 4.6.1 Dome Connection.................32 4.6.2 Dome Protocol Setup ................33 4.6.3 RS485 Setup ..................33 4.6.4 Dome Controlling Keys.................34 4.6.5 Setting Preset Points ................36 4.6.6 Calling Preset Points ................37 Appendix A: Technical Specifications ................38...
-
Page 7: Overview
User’s Manual Overview The DynaGuard 090 Series DVR is an integrated digital video recorder that combines the features of a time-lapse audio / video recorder, a multiplexer, and a video server to create a single security CCTV solution. Its outstanding triplex operation enables users to view live or playback recorded video, and remote access through network simultaneously, while recording other video, and to view wanted recorded video instantly by entering the time and date or selecting recorded video from the event list. -
Page 8: Product Key Features
Export DVR file which can be played via DynaPlayer • DynaPlayer application software will be attached with exported disks • Multiple built-in dome camera protocol: DynaColor, Pelco D, Pelco P, AD422 and Fastrax 2. • Digital Zoom 2X2, available in live mode •... -
Page 9: Product Application Diagram
User’s Manual Product Application Diagram Connect the unit with other devices as shown in the system diagram to complete a video surveillance solution. The figure shows also the expandability and flexibility of this digital recording system. System Setup The notices and introduction on system installation will be described particularly in this chapter. -
Page 10: Selecting Video Format
User’s Manual The unit utilizes heat-conducting techniques to transfer internal heat to the case, especially to the bottom side of the unit. NOTE: Be sure not to remove the rubber feet, and always leave a space for air ventilation on the unit’s bottom side. Selecting Video Format The DynaGuard 090 Series DVR is designed to operate under either NTSC... -
Page 11: Rear Panel Connections
User’s Manual Rear Panel Connections There are various connectors on the rear panel used for DynaGuard Series DVR installations. The following figure shows the connectors by name; and followed by the detailed description of each connector. LAN Connector (RJ-45) The DynaGuard 090 Series DVR is capable of networking. - Page 12 User’s Manual Visdeo System Switch It is used for adjusting the video system of the unit. Video Input A group of BNC connectors are available for video input streams from installed cameras. Alarm I/O & RS485 The unit provides an alarm I/O and RS485 port that offers user the flexibility required to connect the unit to the other device.
- Page 13 User’s Manual Pin Definition for 8ch/16ch Model: Definition Definition ALARM OUT O Alarm OUT C ALARM OUT COM RS485 D/R+ RS485 D/R- Reserved Reserved ALARM In 9 (for 16ch only) ALARM In 1 ALARM In 10 (for 16ch only) ALARM In 2 ALARM In 11 (for 16ch only) ALARM In 3 ALARM In 12 (for 16ch only)
-
Page 14: General System Setup
User’s Manual UTP Input (for 4ch & 8ch models only) Short for Unshielded Twisted Pair, which is a popular type of cable. Due to its low cost, UTP cabling here is used for replacing BNC cabling. There are plenty of UTP connectors positioned on the rear panel of each unit. Next to these connectors places a switch used to enable or disable this function. -
Page 15: Front Panel Introduction
User’s Manual Front Panel Introduction The front panel controls enable user to control the unit and preset the programmable functions. 3.1.1 LED Definition The DynaGuard 090 Series DVR LEDs on the front panel are described as follows. Power LED (Green) The LED lit during the period when the correct power is connected. -
Page 16: Function Keys
User’s Manual 3.1.2 Function Keys The DynaGuard 090 Series DVR functional keys on the front panel for normal operation are described as follows. CHANNEL • When in both Live and Playback modes, press the CHANNEL key to view the corresponding video in full screen. The number of the CHANNEL keys corresponds to the number of cameras supported by the unit. - Page 17 User’s Manual ZOOM/ENTER • In OSD menu or selection interface, press the key to make the selection or save settings. • In live full screen view mode, press to view a 2× zoom image; press it again to exit zoom mode. COPY In Playback mode, press COPY to select the start and end point of the video you want to export.
-
Page 18: Power Up / Down The Unit
User’s Manual Power Up / Down the Unit If you must shut down the DynaGuard 090 Series DVR for any reason, please use the proper shut down and power up procedures to avoid damaging your DVR unit. To Power Up the Unit Check the used type of power source before plug in your DVR first (the unit accepts the power input between AC100V to AC240V) The color bar and system checking information will be shown on the monitor... -
Page 19: Entering Osd Setup Menu
User’s Manual Entering OSD Setup Menu The OSD Main menu contains a list of items that are used to configure the DynaGuard 090 Series DVR. To enter the Main menu, press MENU and then enter Administrator or User password. The Password Verification screen displays as follows. -
Page 20: System Date / Time Setting
User’s Manual System Date / Time Setting User can set the current date, time and other OSD parameters in Date/Time menu. The administrator’s privileges are required for entering the submenu. In OSD Main menu, select <System Setup> and press ENTER, then select <Date/Time>... -
Page 21: Daylight Saving Time
User’s Manual Move to the item and press ENTER, the option starts blinking. Use UP / DOWN keys to change the setting. The default setting is <Y/M/D> in both NTSC / PAL formats. Time Display Mode User can choose to set the time format to <12 hour> or <24 hour>. Use the UP / DOWN keys to change the format. -
Page 22: Record Schedule / Quality Setting
User’s Manual Record Schedule / Quality Setting The Record Setup menu allows user to set recording quality, recording schedules, and other recording parameters. To setup the recording quality and schedules, you have to enter the OSD Setup Menu with correct Administrator's password. -
Page 23: Schedule Setup
User’s Manual 3.5.2 Schedule Setup The Schedule Setup is used to set the day and night time, or weekend recording schedule. Select <Schedule Setup> from the Record Setup menu and press ENTER; the following menu is displayed. Schedule Setup 1. Day Time Start AM 06:00 2. -
Page 24: To Record Event Video Only
User’s Manual 3.5.4 To Record Event Video Only If you want your DVR to record images with triggered alarm (both Alarm in and Motion) only, and stop recording under normal circumstances, then follow the steps to setup your unit: • Enter the OSD setup menu with correct password. •... -
Page 25: Digital Zoom
User’s Manual Viewing in Multi-window Various multi-window view formats are offered for selecting. To switch between available viewing formats, press MODE repeatedly. 4.1.2 Digital Zoom Users are able to view a 2× full screen in live mode. To view the 2× full screen, follow the steps. -
Page 26: Key Usage In Playback
User’s Manual Key Usage in Playback The key usage is slightly changed in playback mode. Following is the key usage found in playback mode. LEFT (Reverse Playback) The key is used to reverse the recorded video while the unit is playing back. Press the key repeatedly to increase the speed of reverse playback by 1×, 2×, 4×, 8×, 16×, or 32×. -
Page 27: Sequence Setup
User’s Manual Sequence Setup This section introduce you how to view in sequence mode Main Monitor and Call Monitor, if connected. Sequence function can avoid manually backtracking and give more flexibility while surveillance. Select certain view format and press SEQ to toggle the automatic sequential sequence, press ESC to stop sequencing. -
Page 28: Searching By Event
User’s Manual NOTE: If there is no available recorded video that matches your specified time and date, the unit starts playback from the next available video. NOTE: The date/time information will be shown on the screen with a DST icon if the Daylight Saving Time function is enabled. “S” indicates summer time and “W”... -
Page 29: Video Export
User’s Manual Follow the steps to playback video from Event List. • Press and hold UP / DOWN to scroll through the Event List. • Press ENTER to play back the selected event record. • Press PLAY/STOP to return to live mode. Video Export The unit allows you to export wanted video to an external device, such as a ®... -
Page 30: To Export Normal Video
User’s Manual The whole process is described step by step in the following sections. 4.4.2 To Export Normal Video To Export normal video to external device, follow these step: • Press SEARCH and play wanted normal video by entering date and time. Note if you are viewing in multiple channel mode, please make sure there is no window displaying in Live mode. -
Page 31: To Export Event Video
User’s Manual 4.4.3 To Export Event Video To export event video, follow these steps: • Press SEARCH and play wanted event video. To play event video, refer to Section 4.3 Searching Recorded Video. • After entering the playback mode, press COPY. The “ezBurn” window displays as below figure. -
Page 32: Dome Control
User’s Manual Purge All Event Data Select the item to delete all event video from database. Purge Event Before The item is used to delete event video that recorded before a specific date. The default of this item is <2000/01/01>. Dome Control DynaGuard 090 Series DVR allows user to control a dome camera by the... -
Page 33: Dome Protocol Setup
To configure dome protocol, select a camera first and set the communications protocol associated with dome camera using the Direction keys and ENTER. The available protocol includes <DynaColor>, <Pelco D>, <Pelco P>, <AD422>, <Fastrax 2> and <None> (default). NOTE: The settings become effective after saving the changes and exiting from the menu. -
Page 34: Dome Controlling Keys
User’s Manual The ID number must match the ID address set by the dome. The Unit ID is in the range of 1 to 255. The default ID is 224. Note that no two devices on the same bus should be given the same ID address, or a conflict may occur. The default DynaGuard 090 Series DVR RS-485 settings are 9600 Baud, 8 Data Bits, 1 Stop Bit and No Parity. - Page 35 User’s Manual Focus Near Use to focus the dome camera near. Zoom In Use to zoom the dome camera in. This function is for user to choose the viewing area, more or less of it. Use to leave dome control mode and return to live and full screen viewing mode.
-
Page 36: Setting Preset Points
User’s Manual 4.6.5 Setting Preset Points The DynaGuard 090 Series DVR allows user to set preset positions; the amount of preset points depends on the dome manufacturer. Follow the steps to set preset points. • Press a Channel key to view the corresponding camera in full screen. •... -
Page 37: Calling Preset Points
User’s Manual 4.6.6 Calling Preset Points Follow the steps to call preset points. • Press a Channel key to view the corresponding camera in full screen. • Then press DOME to enter dome control mode. • Press 2 to view the dome control Hint Screen; press 2 again to toggle the Hint Screen. -
Page 38: Appendix A: Technical Specifications
User’s Manual Appendix A: Technical Specifications All specifications are subject to change without notice. Specifications 4ch Model 8ch Model 16ch Model Video BNCx4, 1.0Vp-p, 75 BNCx8, 1.0Vp-p, 75 BNCx16, 1.0Vp-p, 75 Input Video Standard NTSC/PAL switch selectable Video Operation Triplex (Live, Record, Playback, Remote, and Internet access) BNCx1, 1.0Vp-p, 75 ohm Main Monitor Outputs... - Page 39 Ethernet RJ-45 connector, 10/100Mbps, supports DHCP IE Browser, Windows AP LAN Remote Control Dome Control IE Browser, Windows AP, Front Panel DynaColor, Pelco P, Pelco D, AD422, Fatrax 2 Dome Control Protocol Remote Operation Monitoring, Playback, Instant Recording, Dome Camera Control On-Screen Display...
-
Page 40: Appendix B: Record Duration
User’s Manual Appendix B: Record Duration The record duration relates to recording rate, image quality and HDD capacity. Refer to the following table. NOTE: Record duration times are based on actual tests and represent average file sizes. Performance may vary depending on specific installations and use. Audio recording requires 8 KB per second (or 0.7 GB per day) for data storage. - Page 41 User’s Manual 300 GB Internal Storage 28.9 38.6 57.9 18.8 6.25 3.75 28.9 38.6 57.9 37.5 12.5 54.3 72.3 108.5 600 GB Internal Storage 57.9 77.2 115.7 37.5 12.5 57.9 77.2 115.7 108.5 144.7 Number of Days of Recording 720 x 240 @ 50PPS (without Audio)--PAL Recording Recording Recording...
- Page 42 User’s Manual Number of Days of Recording 720 x 240 @ 60PPS (without Audio)--NTSC Recording Recording Recording Recording Rate Mode Rate Mode 512K 256K 128K Extended Best Standard Number of bpsDSL bpsDSL bpsDSL Record Quality Cameras Total Images Total Images NTSC NTSC NTSC...
- Page 43 User’s Manual 300 GB Internal Storage 13.6 18.1 27.1 27.1 36.1 54.1 17.3 54.3 72.3 108.5 34.5 17.3 108.5 144.7 12.5 69.0 34.5 19.7 289.4 6.25 138.0 69.0 39.4 600 GB Internal Storage 27.1 36.2 54.3 17.3 54.3 72.3 108.5 34.5 17.3 108.5...
Need help?
Do you have a question about the DynaGuard 090 series and is the answer not in the manual?
Questions and answers