Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DynaColor Lite H.264 DVR
Summary of Contents for DynaColor Lite H.264 DVR
- Page 1 Lite H.264 DVR User’s Manual Version 2.5 001AL8X2ZXB5...
- Page 2 DVR User’s Manual...
- Page 3 DVR User’s Manual Caution and Preventive Tips Handle with care, do not drop the unit Mount the unit in an equipment rack or place it on a solid, stable surface Indoor use only. Do not place the unit in a humid, dusty, oily, or smoky site ...
- Page 4 DVR User’s Manual Important Information Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT.
-
Page 5: Table Of Contents
DVR User’s Manual Table of Content 1. Overview ........................7 2. System Setup ........................ 8 Position the DVR ....................8 Connect Devices to the DVR ................8 Rear Panel Connections ..................9 3. General System Setup ....................11 Front Panel Introduction ..................11 3.1.1 LED Definition .................. - Page 6 DVR User’s Manual 3.6.3.4 Alert Port ................30 3.6.3.5 Alert Interval ................30 3.6.4 Event Full Screen ................. 31 3.6.5 Event Duration..................31 3.6.6 Per Channel Config ................31 3.6.6.1 Channel Select ..............31 3.6.6.2 Video Loss Detect ..............31 3.6.6.3 Motion Detect ................
- Page 7 DVR User’s Manual 4.5.2 Dome Protocol Setup ................48 4.5.3 RS485 Setup ..................49 4.5.4 Dome Controlling Buttons ..............49 4.5.5 Set Preset Points .................. 51 4.5.6 Call Preset Points ................. 51 4.5.7 Run Dome Camera Tour............... 52 System Log Exportation ..................52 5.
-
Page 8: Overview
Web-browser plug-in allowing users to view live or recorded video images, and enables remote configuration. The remote software is stored in Lite H.264 DVR and deployed over a LAN, WAN or Internet connection to remote Windows-based computers. This simplifies the installation and maintenance of the software components so all remote users are using the same software coming from the unit. -
Page 9: System Setup
DVR User’s Manual System Setup The notices and introduction on system installation will be described particularly in this chapter. Please follow the description to operate the unit. In order to prevent the unit from data loss and system damage that caused by a sudden power fluctuation, use of an Uninterruptible Power Supply (UPS) is highly recommended Position the DVR... -
Page 10: Rear Panel Connections
DVR User’s Manual Rear Panel Connections There are various connectors on the rear panel for the DVR installations. The following shows the detailed description of each connector. Main Monitor (BNC/ VGA/ Digital Output) The DVR supports three different types of main monitor: BNC, VGA, or Digital Output. - Page 11 DVR User’s Manual Audio In/Out (16CH models only) 16CH models provide audio in/out connection via a D-Sub connector. Users can connect audio source devices for each channel and audio output devices for Main/Call monitors. Refer to Setup Guide for detailed pin definitions for different models.
-
Page 12: General System Setup
DVR User’s Manual General System Setup Before operating the DVR, some general configuration should be setup first. The following subsections will introduce function keys on the front panel and general configuration of the DVR. The regular displayed OSD information and its displayed positions are shown as following figure. -
Page 13: Function Keys
DVR User’s Manual 3.1.2 Function Keys This section describes the functional keys on the front panel of the DVR. Refer to the Setup Guide for the graphical illustration of functional keys. Power Key When the quick shutdown function is enabled, press and hold this key to quick shutdown the DVR. - Page 14 DVR User’s Manual PLAY/STOP Press this key to switch between live image and playback video. NOTE: According to record setting, part of the latest video cannot be played back because the video is still saved in the buffer. FREEZE Press FREEZE while viewing live image, the live video will be frozen. The date / time information shown on the monitor will continue updating.
-
Page 15: Enter Osd Setup Menu
DVR User’s Manual Enter OSD Setup Menu The configuration of the DVR can be customized by entering the intuitive Graphical User Interface (GUI) OSD setup menu. Collaborating with a USB mouse, setting up the DVR can be easy as operating on a PC. Press MENU and select an account to login. -
Page 16: Power Up / Shutdown The Dvr
DVR User’s Manual Account Setup Setup customized account, password, and privilege level in this menu. The account is case sensitive. The privilege level rank from levels 1~8, which level 8 has the highest privilege. Alternatively, select <Disable> to stop using the account. - Page 17 DVR User’s Manual Restart / Shutdown the Unit Press MENU and input the username and password that has sufficient authority to access the OSD setup menu. Select <Shutdown> in Main Menu and press ENTER to enter the Shutdown menu, which displays as follows. Shutdown Power Off Reboot...
-
Page 18: Hdd Auto Scan
DVR User’s Manual 3.3.1 HDD Auto Scan When the DVR is powering on, HDD auto scan will be initiated if there was previously an unusual power loss or file system error. If by any chance auto scan failed, the HDD will need to be formatted. NOTE: If users wish to disable the auto scan function, enter the OSD setup menu via an authorized account and access <Database Setup>... -
Page 19: System Date / Time Setting
DVR User’s Manual System Date / Time Setting Users can set the current date, time and other OSD parameters in Date/Time menu (under System Setup menu). The login account should have authority to access the System Setup menu. In OSD setup menu, select <System Setup>... -
Page 20: Daylight Saving Time
DVR User’s Manual Date Display Mode This function allows users to set the OSD display type of the date. There are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>. “Y” represents “Year”, “M” represents “Month” and “D” represents “Day”. Move to the item and press ENTER, the option starts blinking. -
Page 21: Network Time Protocol Setup
DVR User’s Manual 3.4.3 Network Time Protocol Setup Time Zone Select <Time Zone> to setup the time zone. To find out the correct local time zone, please visit www.greenwichmeantime.com or refer to below figure. NOTE: The <Time Zone> must be set to the correct local time zone or the <Network Time Protocol Setup>... -
Page 22: Record Schedule / Quality Setting
DVR User’s Manual Record Schedule / Quality Setting The Record Setup menu allows users to set recording quality, recording schedules, and other recording parameters. Login with a proper account to access Record Setup menu. In the Main menu, move the cursor to <Record Setup>... -
Page 23: Schedule Setup
DVR User’s Manual NOTE: Since a VBR file does not have a fixed size, the HDD space usage cannot be calculated and thus ezRecord function is not supported for VBR mode. Therefore, if ezRecord is selected as the preset record configuration, the option of this menu item will automatically be set as <CBR>. -
Page 24: Per Camera Configuration
DVR User’s Manual 3.5.4 Per Camera Configuration This function is used to set the Day / Night / Weekend PPS (Picture per Second) and Quality for each channel. The Preset Configuration must be set to <OFF> for accessing these schedules. The menu is displayed as below (Record Mode: 720*240@480PPS in NTSC / 720*288@400PPS in PAL). -
Page 25: Ezrecord Setup
DVR User’s Manual 3.5.5 ezRecord Setup This item aims to ease the complicated record settings, and to make the setup much easier. Note that the item can be reached only when <ezRecord> is selected as the option for <Preset Config>. Select <ezRecord Setup>... -
Page 26: Advance Schedule Setup
DVR User’s Manual 3.5.6 Advance Schedule Setup When <Adv. Schedule> is selected as the option for <Preset Config>, users need to further configure the schedule and recording setting under this menu. The Advance Schedule setup menu is shown as below. Advance Schedule Setup Schedule Table Recording Profile Setup... -
Page 27: Recording Profile Setup
DVR User’s Manual 3.5.6.2 Recording Profile Setup Enter this menu to setup normal and event recording options for profile 1, profile 2 and profile 3 for each channel. Follow the steps below to complete the setting. Recording Profile Setup Cameral Select CH01 Profile 1 Profile 2... -
Page 28: Data Lifetime Setup
DVR User’s Manual 3.5.7 Data Lifetime Setup Data Lifetime indicates the duration that a video is saved and recallable in the HDD. Only those video recorded within Data Lifetime can be displayed on the screen and played back. The video exceeded Data Lifetime will be hidden and cannot be retrieved for playback. -
Page 29: Circular Recording
DVR User’s Manual 3.5.8 Circular Recording Users can choose to record video in circular mode or in linear mode. If circular mode is selected, the DVR will stores new video into the HDD spaces while overwrite the oldest recorded video. Alternatively, if linear mode is selected, the DVR will stop recording when the HDD is full. -
Page 30: Event Setting
DVR User’s Manual Purge Event Before The item is used to delete event video before a specific date. Use LEFT / RIGHT keys to move the cursor to next or previous field, ENTER to select the item and UP / DOWN to adjust the value. Start To Purge After the video or data to be deleted are selected, set this item to <Yes>... -
Page 31: Alert Notification Setup
DVR User’s Manual 3.6.3 Alert Notification Setup This function allows users to send alert notifications to the CMS software which had been installed to users’ computer. For further setup instruction at the CMS side, please refer to the CMS user’s manual. Alert Notification Setup Alert Configuration Set Alert Notification... -
Page 32: Event Full Screen
DVR User’s Manual 3.6.4 Event Full Screen This function allows the DVR to display the alarm channel in full screen size when an alarm is triggered. Select <None> to disable this function; select <Main> to display the alarm channel on Main Monitor when an alarm is triggered;... -
Page 33: Motion Detect
DVR User’s Manual 3.6.6.3 Motion Detect This item allows users to enable or disable motion detection function of the DVR. Select <On> to enable Motion Detect alarm events, or <Off> to disable. If motion detection function is enabled, it is required to define motion detection parameters such as detection area and sensitivity settings in <Detection Config>. -
Page 34: Alarm In
DVR User’s Manual Block Threshold <Block Threshold> indicates the motion alarm triggered level; select from <1> to <16>. Selecting <1> means the DVR will trigger the alarm when one grid is detected; and selecting <16> means the DVR will trigger the alarm when 16 grids are detected. -
Page 35: E-Mail Management
DVR User’s Manual 3.6.7 E-mail Management Users can setup three sets of e-mails for receiving event/alarm notices. Follow the brief steps below to setup the e-mail management setting. NOTE: In order to successfully send a notification e-mail, be sure that the DVR is connecting to the internet. -
Page 36: Basic Operation
DVR User’s Manual Basic Operation The DVR allows users to access some general operations through the front panel easily. The following sections introduce the general operations of the unit. View Live / Playback Video The general functions in live and playback mode are described in the following sections. -
Page 37: Digital Zoom
DVR User’s Manual 4.1.2 Digital Zoom Users are able to view a 2× full screen in live mode. To view the 2× full screen, follow the steps. Press any CHANNEL key to view the corresponding camera in full screen. ... -
Page 38: Playback Control Panel
DVR User’s Manual Playback Control Panel The Playback Control Panel will be displayed during the playback. Users need to connect a mouse to click on the controlling items on the Playback Control Panel. Refer to the following description for each controlling items. Time Bar: The time bar will show available normal videos in yellow, while ... -
Page 39: Capture Snapshots
DVR User’s Manual Key Usage of Front Panel / Remote Controller Refer to the following for key usage of the front panel and the remote controller in Playback mode. LEFT (Reverse Playback): The key is used to reverse the recorded video ... -
Page 40: Sequence
DVR User’s Manual Sequence This section introduces the way to view sequence mode with both Main Monitor and Call Monitor, if connected. Sequence function can avoid manual backtracking and provides more flexibility while monitoring surveillance. 4.2.1 Sequence with Main Monitor Automatic sequence function can be observed in any view mode. -
Page 41: Search Recorded Video
DVR User’s Manual Search Recorded Video The DVR is capable of searching and playing back recorded video by time or by events. To search by time, select a specific date and time of the wanted video. To search by event, select channels to display the event list. In live or playback mode, press SEARCH to enter the Search menu, shown as below. -
Page 42: Calendar Search
DVR User’s Manual 4.3.2 Calendar Search Follow the steps below to search recorded video via Calendar Search. Press SEARCH button to enter the Search menu. Move the cursor to <Calendar Search> and press ENTER. The following menu will be displayed. ... -
Page 43: Search By Event
DVR User’s Manual 4.3.3 Search by Event “Event List” allows users to search wanted video by event. The Event List is displayed as below figure: Event List First Page Date Time Type 2011/03/17 11:26:50 Motion 2011/03/17 09:53:03 Alarm 2011/03/16 16:14:42 Alarm 2011/03/15 03:45:31... -
Page 44: Video Export
DVR User’s Manual Video Export The following sections will show how to export video through the OSD setup menu and through the hot keys on the front panel, respectively. Note that the system log will keep records of all video exportations, including duration, start time, and end time. -
Page 45: Select Video For Exporting
DVR User’s Manual The DVR only supports EXT3 file system. If an external HDD will be connected to the unit, ensure the format of the HDD is EXT3. Device Name The item shows the name of the available device. Available The item shows the free space of the available device. -
Page 46: Digital Signature
DVR User’s Manual Export Format This item is for selecting exporting video format. The options are <DRV>, <AVI>, and <Original>. The DRV and AVI files are compressed video files while the original files are raw data of the unit’s recorded video. The DRV and original files can only be played back with the remote monitoring software and DVRPlayer, and multiple cameras video can be played back from one file. -
Page 47: Quick Video Export
DVR User’s Manual 4.4.2 Quick Video Export The DVR allows users to easily export wanted video as *.drv file with the built-in DVD+RW or to an external device, such as a USB ThumbDrive, and the exported video will be saved as *.drv file. If the video is to be exported to an external device, make sure the device is connected to the DVR unit and the port has been set appropriately for video export. -
Page 48: Export Normal Video
DVR User’s Manual 4.4.2 Export Normal Video To Export normal video to external device, follow these step: Press SEARCH and play wanted normal video by entering date and time. Note if the screen is showing in multiple channel mode, please make sure there is no window displaying in Live mode, or the export will not work. -
Page 49: Dome Control
DVR User’s Manual If there is no any exportable device connected to the DVR unit, a warning message will be shown on the screen Press ENTER to start the export the whole event video to the connected device; or, press ESC to abort. Dome Control The DVR allows users to control a dome camera by the front panel. -
Page 50: Rs485 Setup
DVR User’s Manual 4.5.3 RS485 Setup The DVR controls the domes via RS-485 communication protocol. The RS-485 parameters in the DVR must be set to the same parameters set in dome camera. Users are allowed to change the RS-485 settings of the DVR. Select <System Setup>... - Page 51 DVR User’s Manual Focus Far Click on it to focus the lens of selected dome camera at a farther point. Focus Near Click on it to focus the lens of selected dome camera at a nearer point. Zoom Out Click on it to zoom out the lens of selected dome camera. This function enables users to shrink the current image and a larger viewing area can be displayed.
-
Page 52: Set Preset Points
DVR User’s Manual 4.5.5 Set Preset Points The DVR allows users to set preset positions. The amount of preset points depends on the dome manufacturer. Follow the steps to set preset points. Press a Channel key to view the corresponding camera in full-screen. ... -
Page 53: Run Dome Camera Tour
DVR User’s Manual 4.5.7 Run Dome Camera Tour Users can also display dome camera tour setup at the dome camera side. Follow the steps to run display of dome camera tour. Press a Channel key to view the corresponding camera in full-screen. ... -
Page 54: Remote Monitoring Software
DVR User’s Manual Remote Monitoring Software The remote monitoring software is a remote browser-based software application designed to operate with the DVR products. Using the software, users are allowed to view live and recorded video, and configure the DVRs remotely via a LAN, WAN or Internet on a personal computer. The connected PC will automatically download the remote monitoring software plug-ins from the DVR when the DVR is connected by entering its IP address in the address bar on the browser. -
Page 55: Installation Of Software
DVR User’s Manual Installation of Software Refer to the following description to install the remote monitoring software. 5.2.1 Change Internet Settings The PC operating with the remote monitoring software should be set to accept ActiveX plug-ins. Please follow the steps to set the Internet security settings appropriately. - Page 56 DVR User’s Manual Uncheck “Require server verification (https:) for all sites in this zone”. Type the IP address of the unit in field and click <Add> to add this web site to the zone. Click <OK> to confirm the setting and close Trusted sites dialog. ...
-
Page 57: Install The Remote Monitoring Software
DVR User’s Manual 5.2.2 Install the Remote Monitoring Software Start the browser to initiate the installation of the remote monitoring software on the PC. The IP address of the DVR can be saved as a Favorites item in the web browser to enable easy access in the future. NOTE: To prevent from UAC restriction for installation of ActiveX plug-ins, it is recommended to run IE as the administrator. -
Page 58: Login / Logout
DVR User’s Manual 5.2.2.1 Login / Logout Login using the same accounts setup in the DVR. The authority is also the same as setup in the DVR. One preset account “admin” and up to two other accounts can access a DVR at the same time. -
Page 59: Software Upgrades
DVR User’s Manual 5.2.2.2 Software Upgrades If a new version of the remote monitoring software is available on the DVR, upgrade will be prompted while accessing the unit. Follow the steps to upgrade the software. The message as the above figure will be prompted. Click <Yes> to accept version upgrade. -
Page 60: Select Display Mode
DVR User’s Manual 5.3.1.1 Select Display Mode Choose the number of windows to be displayed on the main window. Click one of the display buttons in MODE section. Available selections are 4, 9 and 16 camera displays. To view certain window in full screen, either double-click on the wanted window, or click on the corresponding CAMERA button. -
Page 61: Instant Recording
DVR User’s Manual Focus +/− Use these buttons to adjust the camera lens to focus on objects for a clear view. Click on <Focus +> to focus near or <Focus −> to focus far. Iris +/− This item is used to open and close the iris to let more or less light into the camera. -
Page 62: Playback Video
DVR User’s Manual 5.3.3 Playback Video The remote monitoring software allows users to view recorded video either from the DVR, or from the hard disk drive of the PC To access the Playback screen, click <Play> button on the main window toolbar. -
Page 63: Playback Local *.Drv Files
DVR User’s Manual The other option <Download (.DRV)> in <Select> field enables users to download the video segment of selected date and time to the PC. The selection of time duration is the same as described above. Files downloaded will be in *.drv format. 5.3.3.2 Playback Local *.drv Files The <Local Playback>... -
Page 64: Verify Digital Signature
DVR User’s Manual 5.3.4 Verify Digital Signature The digital signature aims to authenticate a video file exported from the unit. Follow the description to verify the digital signature. Click <Play> on the main window toolbar. Click <Verify> tab to display the Verify window. ... -
Page 65: Take A Snapshot
DVR User’s Manual 5.3.6 Take a Snapshot Snapshot is a simple screen capture tool. When users click on the SNAPSHOT button, it will capture the screenshot of the window that is currently showing on the screen. Each click captures one screenshot to be saved as a JPEG file on the desktop. -
Page 66: Remote Monitoring Software Troubleshooting
DVR User’s Manual 5.3.9 Remote Monitoring Software Troubleshooting What happened if the server requests to upgrade the software every time the DVR is connected? If the following screen displays repeatedly, please follow the steps to delete the temporary internet files. ... -
Page 67: Appendix A: Recommended Hdds
DVR User’s Manual Appendix A: Recommended HDDs Refer to the following list for some recommended HDDs to be used in the DVR. Brand Model Name Model Number Size SV35 ST3500411SV 500 GB SV35 ST31000526SV 1.0 TB SV35 ST2000VX002 2.0 TB Seagate SV35.5 ST31000525SV... -
Page 68: Appendix B: Remote Controller
DVR User’s Manual Appendix B: Remote Controller The operational function keys on the remote control are listed as below figure:... - Page 69 DVR User’s Manual The keys of the remote control function as the keys of the front panel of the DVR. The only difference between the remote control and the front panel keys is the “DVR SEL” key. The DVR Selection key is used to switch control between each DVR. The remote control can be used to control up to 16 DVRs.
-
Page 70: Appendix C: Setup A Dvr Behind A Router
DVR User’s Manual Appendix C: Setup a DVR behind a Router This appendix describes how to set up a router if the DVR connects to the internet via a router. To properly operate a web server, e.g. a DVR, users have to set up both the IP and port of the DVR, which are essential for data and command transmission. - Page 71 DVR User’s Manual Following is an example of how the router should be set. Router DVR 1 DVR 2 (D-Link DI-724P+) IP: 192.168.0.100 IP: 192.168.0.167 IP: 192.168.0.200 WAN IP: 218.160.54.13 Trigger port: 80 Trigger port: 81 LAN IP: 192.168.0.1 To change the setting of the router, a PC with web browser is required. ...
- Page 72 DVR User’s Manual A. Select <Enabled> to set up the service. B. Enter the name of the setting in the Name field: DVR 1. C. Enter Private IP: 167 D. Choose <TCP> as the Protocol Type. E. Enter Private Port: 80. F.
Need help?
Do you have a question about the Lite H.264 DVR and is the answer not in the manual?
Questions and answers