DynaColor 900 series Hybrid Setup Manual

Package Content
Inspect the packaging carton. Make sure the Lite H.264 DVR is properly delivered. Remove all
items from the box and make sure the box contains the following items.
Lite H.264 DVR
Front Panel
1 Channels
2 Network LED
3 Record LED
4 Alarm LED
5 Power LED
6 PLAY/STOP
7 SEQ
8 MENU
9 SEARCH
10 Direction Keys
11 USB 2.0 Port
12 MODE
13 DOME
14 FREEZE
15 COPY
16 CALL
00P5L2080Z2FEB2
Lite H.264 DVR
Setup Guide
SATA Cable
1. In Live and Playback modes, press any key to view the corresponding
video in full-screen.
2. In input interface, 1~10 can be used for direct input of numbers 0~9.
3. In Dome Camera Control mode, 1 is for entering the Set/ Go preset
menu; 11~16 is for quick access of preset points 1~6.
It lights up when network is connected. In addition, it blinks when data is
being transmitted via the network.
It blinks when videos are being recorded.
It lights up when an alarm is triggered.
It lights up when power source is connected.
Press once to start the playback of recorded video. Press again to exit.
Press this key to start automatic sequence display of cameras.
Press this key to enter the OSD setup menu.
Press this key to search recorded video by date/time or event.
1. In Zoom mode, these keys function as normal direction keys.
2. In the OSD setup menu, the direction keys are used to move the
cursor to previous or next fields. To change the value in the selected
field, press UP / DOWN keys.
The USB 2.0 port allows users to connect an external USB device to the
unit, such as a USB ThumbDrive or a USB mouse.
Press this key to view in full-screen or multiple window modes.
Press this key to enter Dome Camera Control mode.
Press this key to freeze the current viewing screen.
This key is used for marking time in quick video export function.
Press this key to enter Call Monitor Control mode.
Power
Power Cord
Adaptor
User's
Manual
1