Table of Contents
Advertisement
Quick Links
TM
DynaGuard
200 Series DVR
Quick Installation Guide
Package Content
TM
Inspect the packaging carton. Make sure your DynaGuard
200 series DVR is properly delivered.
Remove all items from the box and make sure the box contains the following items.
TM
DynaGuard
200 series DVR
Power cord
Blank CD-RW
User's manual
Function Keys on the Front Panel
Connecting Your DVR
All rights reserved
1
www.dynacolor.com.tw
00-5DG200DSEA1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DynaColor DynaGuard 200
Summary of Contents for DynaColor DynaGuard 200
- Page 1 200 series DVR is properly delivered. Remove all items from the box and make sure the box contains the following items. DynaGuard 200 series DVR Power cord Blank CD-RW User’s manual Function Keys on the Front Panel Connecting Your DVR All rights reserved www.dynacolor.com.tw 00-5DG200DSEA1...
- Page 2 Alarm In 7 Normal Close 1 RS485 D+ Alarm In 6 Ground Normal Open 2 Alarm In 5 Alarm In 4 Common Node 2 RS485 D- Alarm In 3 Normal Close 2 RS485 D+ Alarm In 2 Ground All rights reserved www.dynacolor.com.tw...
-
Page 3: Basic Setup
<LAN> or <PPPoE> according to your network application, and enter <LAN/PPPoE Setup>. • For DHCP user, set the DHCP to <ON>. The IP address, Netmask, Gateway and DNS settings are retrieved from network servers. DHCP is dynamic; the settings will change from time to time. All rights reserved www.dynacolor.com.tw... -
Page 4: Dome Control
Dome Control Dome Connection & Settings: • See section Connecting Your DVR for RS-485 port pin definition. • Refer to the following figure. Connect the R+, R- terminals on the dome camera to the D+, D- All rights reserved www.dynacolor.com.tw... -
Page 5: Basic Playback Operation
To set up dome protocol and ID, press MENU to access the Main menu, and select <Camera Setup>. The available protocols include <DynaColor>, <Pelco D>, <Pelco P>, <AD422> and <None> (default). Note that ID number must match the ID address defined by the dome. -
Page 6: Using Remote Software
OSD Main menu; select <System Setup>, <Network Setup>, then <LAN/PPPoE Setup> to check the IP. Changing Internet Setting: • Start the IE; select <Tools> from the main menu of the browser, then <Internet Options> and then click the <Security> tab. All rights reserved www.dynacolor.com.tw... - Page 7 , see DynaRemote user’s manual. Software Upgrade: • When a new version of DynaRemote software is available on your DynaGuard 200 series unit, it will be automatically installed on your PC when you access the unit. All rights reserved www.dynacolor.com.tw...
- Page 8 • Select the wanted *.avi file, and click <Open>. NOTE: The *.avi files stored for each channel are separated, and therefore the video can be played back in single channel, full screen mode only. Playback Controls: All rights reserved www.dynacolor.com.tw...
Need help?
Do you have a question about the DynaGuard 200 and is the answer not in the manual?
Questions and answers