Nic Indicator Codes; Related Documentation - Dell PowerEdge R220 Owner's Manual

Item Indicator, Button, or
Connector
11 Power supply
12 Retention clip

NIC Indicator Codes

Figure 3. NIC Indicator
1. link indicator
Indicator Indicator Code
Link and activity The NIC is not connected to the network.
indicators are off
Link indicator is The NIC is connected to a valid network at its maximum port speed (1 Gbps or 10
green Gbps).
Link indicator is The NIC is connected to a valid network at less than its maximum port speed.
amber
Activity indicator is Network data is being sent or received.
blinking green

Related Documentation

WARNING: See the safety and regulatory information that shipped with your system. Warranty
information may be included within this document or as a separate document.
10
Icon Description
within a rack. When one of these buttons is
pressed, the system status indicator on the back
flashes until one of the buttons is pressed again.
Press to toggle the system ID on and off.
If the system stops responding during POST, press
and hold the system ID button for more than five
seconds to enter BIOS progress mode.
To reset iDRAC (if not disabled in the iDRAC
Settings option) press and hold the button for
more than 15 seconds.
250 W AC power supply.
Secures the power cable.
2. activity indicator