System Setup Options - Dell PowerEdge R220 Owner's Manual

Keystroke Action
<Esc> Moves to the previous page till you view the main screen. Pressing <Esc> in the
main screen displays a message that prompts you to save any unsaved changes and
restarts the system.
<F1> Displays the System Setup help file.

System Setup Options

System Setup Main Screen
NOTE: Press <Alt><F> to reset the BIOS or UEFI settings to their default settings.
Menu Item Description
System BIOS This option is used to view and configure BIOS settings.
iDRAC Settings This option is used to view and configure iDRAC settings.
Device Settings This option is used to view and configure device settings.
System BIOS Screen
NOTE: The options for System Setup change based on the system configuration.
NOTE: System Setup defaults are listed under their respective options in the following sections,
where applicable.
Menu Item Description
System Displays information about the system such as the system model name, BIOS
Information version, Service Tag, and so on.
Memory Settings Displays information and options related to installed memory.
Processor Settings Displays information and options related to the processor such as speed, cache
size, and so on.
SATA Settings Displays options to enable or disable the integrated SATA controller and ports.
Boot Settings Displays options to specify the boot mode (BIOS or UEFI). Enables you to modify
UEFI and BIOS boot settings.
Integrated Devices Displays options to enable or disable integrated device controllers and ports, and to
specify related features and options.
Serial Displays options to enable or disable the serial ports and specify related features
Communication and options.
System Profile Displays options to change the processor power management settings, memory
Settings frequency, and so on.
14
NOTE: For the standard graphics browser only.
NOTE: For most of the options, any changes that you make are recorded but
do not take effect until you restart the system.