Removing & Installing Body Components; Seat - Honda CB650F Owner's Manual

Removing & Installing Body Components

Seat

Rear stays
Front
Prong
Front stay
58
Honda CB650F Owner's Manual
❙
1. Insert the ignition key into the seat lock,
Rear Prongs
2. Pull the rear of the seat back and up.
Seat
❙
Seat lock
1. Insert the front and rear prongs into the
2. Push forward and down on the rear of the
Ignition key
The seat locks automatically when installed.
Take care not to lock your key in the
compartment under the seat.
http://www.motorcycle.in.th
Removal
and turn and hold the key clockwise to
unlock the seat.
Installation
front and rear stays on the frame.
seat until it locks in place.
Make sure that the seat is locked securely
in position to pull it up lightly.