Honda CB650F Owner's Manual page 94

Installation
1. Attach the side collars to the wheel.
2. On the left side, place the wheel between
the fork legs and insert the lightly greased
front axle shaft to the end, through the
left fork leg and wheel hub.
3. Align the end of the front axle shaft with
the surface of the fork leg.
4. Tighten the left axle pinch bolt to hold
the axle.
Honda CB650F Owner's Manual
Surface of fork
leg
End of front
axle shaft
http://www.motorcycle.in.th
Tyre Puncture
5. Tighten the axle bolt.
Torque: 59 N·m (6.0 kgf·m, 44 lbf·ft).
6. Loosen the left axle pinch bolt.
7. Tighten the right axle pinch bolt.
Torque: 22 N·m (2.2 kgf·m, 16 lbf·ft).
8. CB650FA only
Secure the wheel speed sensor wire with
the clamp.
Wheel speed
sensor wire
9. Install the right brake caliper and tighten
new mounting bolts.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
u Removing Wheels
Clamp
continued 91