Brother DCP8080DN Service Update Information page 5

DCP8080DN, DCP8085DN, MFC8480DN, MFC8680DN, MFC8890DW
8. Remove the Roller Holder Assembly:
a. Press down on the Lift Arm to release the Roller Holder Assembly.
b. Rotate the Roller Holder Assembly toward the front of the machine.
c. Slide the Roller Holder Assembly to the right.
d. Remove the Roller Holder Assembly by sliding it at an angle to the left.
b
9. Remove the Separation R Shaft Bearing:
a. Release the hook on the bearing.
b. Push the end of the Separation Roller Drive Shaft to the left far enough to clear the hook on
the bearing.
c. Remove the bearing.
"No Paper" Message and Clicking Noise
March 22, 2010
c
a
b
a
Page 5 of 15
SERVICE
UPDATE No.
F1290
d
c