Line Out Level; Routing - Lyngdorf Audio RoomPerfect RP-1 Owner's Manual

Line Out Level

This adjusts the overall output level in steps of -0.1 db, it can be attenuated to –40 dB in total.

Routing

In Routing it is possible to apply different settings to the Main and Line outputs:
Symbol
R
L
R
L
R L
Left and Right channel switching
L R
M
M
A highpass and a lowpass fi lter can be applied to the Main and Line outputs when you want to connect
an additional amplifi er or subwoofer along with your main amplifi er.
A Mono setting is also available for the Line output, this is used when connecting a single subwoofer to
the Line output.
If no fi lter is selected the full frequency range will be directed to the Main and Line Out terminals. If a
fi lter is selected the frequencies above or below the selected crossover frequency will be directed to the
analog Main or Line Out terminals.
When a highpass or lowpass fi lter has been chosen, the Crossover Frequency and Filter Type menus are
enabled.
Line Out Level
Routing
Name
Highpass fi lter
Lowpass fi lter
Mono
Mono lowpass fi lter
Main output Line Output
X
X
X
-
-
X
X
-
X
X
27