Display
The sub menus accessible in the Display menu are:
Display Timeout
Display Timeout
Display Timeout set-up is used for enabling/disabling the 10 sec. display 'switch'off' feature. If enabled
the Main Display reading will switch off after 10 sec of inactivity from the front panel buttons or re-
mote.
Display Brightness
Disp. Brightness
Display Brightness is used to control the brightness of the display. The brightness can be set to 25%,
50%, 75% or 100%.
Input Connection
The Input Connection can be set to:
•
Balanced / XLR or,
•
Unbalanced / RCA
The default setting is Balanced / XLR.
Remember to select the same input as physically connected.
If the setting is not correct you may experience humming.
Display
Display Timeout
Disp. Brightness
Display Timeout
Display Brightness
Input Connection
25