Introduction To Roomperfect; Global Listening; Focus Listening; Voicing - Lyngdorf Audio RoomPerfect RP-1 Owner's Manual

Room processor
Table of Contents

Advertisement

Introduction to RoomPerfect™

Once the guided set-up has been successfully completed you have the option to listen to music through
two listening settings; Focus and Global room correction fi lters. To toggle between the two fi lters and
'Bypass' you simply press the Up/Down buttons on the front panel or remote control.They can also be
selected directly with the numerical buttons on the remote, 0 for bypass, 1 for Focus or 9 for Global.

Global Listening

The Global fi lter improves the sound quality across the whole room. When you are listening to music in
a room but are not sat in any particular listening position, the global fi lter gives the best result.

Focus Listening

The Focus fi lter improves the sound quality at a listening position by exploiting the 3-dimensional acous-
tic properties gained through the room measurements. This makes the Focus fi lter the best solution for
optimal sound quality at a specifi c listening position.

Voicing

When using RoomPerfect™ you will experience a much more precise and detailed sound reproduction
– which could also be described as more analytical.
The Voicing setting is an EQ fi lter that can be used to gently amplify or attenuate certain frequencies ac-
cording to your personal preferences and/or to compensate if a given recording sounds too 'bright' or too
'dark'. The standard voicing settings, and their numerical value on the remote control, are:
Neutral (0), Music 1 (1), Music 2 (2), Relaxed (3), Open (4), Open Air (5), Soft (6).
The frequency curves of the different voicing settings can be viewed in the appendix. Neutral is a bypass
setting.
You can toggle between neutral and the available voicings by pressing the Left/Right buttons on the re-
mote or front panel. The can also be selected directly by pressing "info" followed by the voicing number
on the remote control.
17

Advertisement

Table of Contents
loading

Table of Contents