Toyota CAMRY 2016 Owner's Manual page 87

● Maintenance system (U.S.A.)
Select to reset the message after the required maintenance is
performed. ( → P. 381)
● Initialization
Registered or changed meter settings will be deleted or returned
to their default setting.
*
: Speed limit display may not be available for some regions.
■
Setting display automatic cancelation
In the following situations, a setting display in which the settings can be
changed through the meter control switches will automatically be turned off.
●When a warning message appears while the setting display is displayed
●When the vehicle begins to move while the setting display is displayed
■ Tire inflation pressure (vehicles with a tire pressure warning system)
● Vehicles without a smart key system:
It may take a few minutes to display the tire inflation pressure after the
engine switch is turned to the "ON" position. It may also take a few min-
utes to display the tire inflation pressure after inflation pressure has
been adjusted
Vehicles with a smart key system:
It may take a few minutes to display the tire inflation pressure after the
engine switch is turned to IGNITION ON mode. It may also take a few
minutes to display the tire inflation pressure after inflation pressure has
been adjusted
● "---" may be displayed if the tire information cannot be determined due to
unfavorable radio wave conditions.
● Tire inflation pressure changes with temperature. The displayed values
may also be different from the values measured using a tire pressure
gauge.
■
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
2. Instrument cluster
I n f o r ma t i o n P r o v i d e d b y :
85
2