Toyota CAMRY 2016 Owner's Manual page 218

216
4-5. Using the driving support systems
■
Turning off both TRAC and VSC systems
To turn the TRAC and VSC systems off, press and hold
seconds while the vehicle is stopped.
The VSC OFF indicator light will come on and the "TRAC OFF" and a mes-
sage will be shown on the multi-information display
Press again to turn the systems back on.
*
: On vehicles with pre-collision system, pre-collision brake assist and pre-
collision braking will also be disabled. The pre-collision system warning
light will come on and the message will be shown on the multi-information
display. (→P. 222)
■
When the message is displayed on the multi-information display show-
ing that TRAC has been disabled even if
TRAC cannot be operated. Contact your Toyota dealer.
■
Sounds and vibrations caused by the ABS, brake assist, TRAC and VSC
systems
●A sound may be heard from the engine compartment when the brake pedal
is depressed repeatedly, when the engine is started or just after the vehicle
begins to move. This sound does not indicate that a malfunction has
occurred in any of these systems.
●Any of the following conditions may occur when the above systems are
operating. None of these indicates that a malfunction has occurred.
• Vibrations may be felt through the vehicle body and steering.
• A motor sound may be heard after the vehicle comes to a stop.
• The brake pedal may pulsate slightly after the ABS is activated.
• The brake pedal may move down slightly after the ABS is activated.
■
EPS operation sound
When the steering wheel is operated, a motor sound (whirring sound) may be
heard. This does not indicate a malfunction.
*
has not been pressed
I n f o r ma t i o n P r o v i d e d b y :
for more than 3
.