220
4-5. Using the driving support systems
Changing the pre-collision system
Changing the alert timing of the pre-collision system
■
Each time the PCS switch is
pressed, the response to the
distance changes as follows.
Far
1
*
Middle
2
Near
3
*
: Default setting
Turning off the pre-collision system
■
Press the PCS switch for 3 or
more seconds.
The PCS warning light turns on
and a message is shown on the
multi-information display.
To turn on the system, press the
PCS switch again. The system
is set to on each time the engine
switch is turned to IGNITION
ON mode.
Radar sensor
The radar sensor detects vehi-
cles or other obstacles on or near
the road ahead and determines
whether a collision is imminent
based on the position, speed, and
heading of the obstacles.
I n f o r ma t i o n P r o v i d e d b y :