Toyota CAMRY 2016 Owner's Manual page 191

Changing the vehicle-to-vehicle distance
Pressing the button changes the
vehicle-to-vehicle distance as fol-
lows:
Long
1
Medium
2
Short
3
The vehicle-to-vehicle distance is
set automatically to long mode
when the engine switch is turned to
IGNITION ON mode.
If a vehicle is running ahead of
you, the preceding vehicle mark
will also be displayed.
Vehicle-to-vehicle distance settings
Select a distance from the table below. Note that the distances shown
correspond to a vehicle speed of 50 mph (80 km/h). Vehicle-to-vehicle
distance increases/decreases in accordance with vehicle speed.
Distance options
Long
Medium
Short
Canceling and resuming the speed control
Pulling the lever toward you
1
cancels the cruise control.
The speed setting is also canceled
when the brakes are applied.
Pushing the lever up resumes
2
the cruise control and returns
vehicle speed to the set speed.
Resuming is available when the
vehicle speed is more than approx-
imately 25 mph (40 km/h).
4-5. Using the driving support systems
Preceding
vehicle mark
Preceding vehicle mark
Vehicle-to-vehicle distance
Approximately 160 ft. (50 m)
Approximately 130 ft. (40 m)
Approximately 100 ft. (30 m)
I n f o r ma t i o n P r o v i d e d b y :
189
4