Toyota CAMRY 2016 Owner's Manual page 298

296
5-9. Bluetooth
■
Release Tones
●A continuous tone signal is a character string that consists of numbers and
the characters p or w. (e.g.056133w0123p#1∗)
●When the "p" pause tone is used, the tone data up until the next pause tone
will be automatically sent after 2 seconds have elapsed. When the "w"
pause tone is used, the tone data up until the next pause tone will be auto-
matically sent after a user operation is performed.
●Release tones can be used when automated operation of a phone based
service such as an answering machine or bank phone service is desired. A
phone number with continuous tone signals can be registered in the contact
list.
●Tone data after a "w" pause tone can be operated on voice command during
a call.
To transfer a call
Select "Handset Mode" to on from a hands-free call to a cellular
phone call.
Select "Handset Mode" to off from a cellular phone call to a hands-free
call.
Transmit volume setting
Select "Transmit Volume".
1
Select the desired level for the transmit volume.
2
Select "OK".
3
To hang up
Press the
®
phone
switch on the steering wheel or select
I n f o r ma t i o n P r o v i d e d b y :
.