Assembling The Blades - Hunter 23348 Installation And Operation Manual

3-1. Attach each blade to the blade iron using three barrel nuts and
three decorative screws. Use the provided Allen wrench to attach
the decorative screws. You may install the decorative screws and
barrel nuts facing up or down.
3-2. Attach each blade iron to the fan motor with two blade iron
armature screws. Securely tighten the screws.
3-3. Lower the top housing over the top of the fan motor, allowing the
rectangular hole to fit over the reversing switch, and attach the
top housing to the adapter using three housing cover screws. The
top housing will rest on top of the adapter and should not touch
the motor.
3 • Assembling the Blades
Allen Wrench
Blade
Mounting
Screw
42664-01 • 06/09/08 • Hunter Fan Company
Step 3-1
Step 3-2
Blade Iron
Armature
Screw
Step 3-3
6
Decorative
Screws
Barrel Nuts
Housing
Cover
Screws