Hunter 23722 Owners And Installation Manual

Type 2 models

Advertisement

For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45052-01
20100426
©2010 Hunter Fan Co.
Type 2 Models
Type 2 Models
Type 2 Models
Owner's Guide and Installation Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 23722 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hunter 23722

  • Page 1 Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 45052-01 20100426 ©2010 Hunter Fan Co.
  • Page 2 Makes Installation Fast in 3 Easy Steps 1. Install mounting bracket and make wiring connections 2. Attach EasyLock Blades 3. Install bulb(s) and glass Installation is complete! Please follow the detailed installation instructions inside this manual 45052-01 • 04/26/10 • Hunter Fan Company...
  • Page 3: Table Of Contents

    Ceiling Fan ......16 use a solid-state speed control with this fan. Use only Hunter speed 9 • Troubleshooting....17 controls.
  • Page 4: Preparing The Fan Site

    If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
  • Page 5 ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 45052-01 • 04/26/10 • Hunter Fan Company...
  • Page 6 Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling instructions for all three Installer’s Choice mounting methods.
  • Page 7: Getting Ready

    • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
  • Page 8: Installing The Hanger Bracket

    Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer Steps 2-2 – 2-4 Ceiling Peak Ceiling Peak Large Large Opening Opening 3” Screw LEFT RIGHT Step 2-3 (Angled Ceiling Only) 45052-01 • 04/26/10 • Hunter Fan Company...
  • Page 9: Assembling And Hanging The Fan

    (Rotate the fan until you hear the notch pop into place.) Steps 3-4 – 3-5 Go to 4 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these installation instructions. 45052-01 • 04/26/10 • Hunter Fan Company...
  • Page 10 WARNING: Fan may fall if not assembled as directed in these installation instructions. Steps 3-8 – 3-9 Low Profile Washer Step 3-7 (Detail) Low Profile Washer Adapter Canopy Trim Ring #8-32 x 3/4” Screw Step 3-10 45052-01 • 04/26/10 • Hunter Fan Company...
  • Page 11: Wiring The Fan

    4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 45052-01 • 04/26/10 • Hunter Fan Company...
  • Page 12: Installing The Canopy And Canopy

    5-6. Twist canopy trim ring clockwise to secure the canopy. Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counterclockwise until it releases from canopy. Step 5-3 Step 5-4 Step 5-5 Canopy Screw 45052-01 • 04/26/10 • Hunter Fan Company...
  • Page 13: Assembling The Blades

    6-2. Align the holes in the blade with the blade iron. 6-3. Close the locking mechanism securely. You will feel it lock into place. 6-4. Repeat steps 6-1 through 6-3 until all blades are installed. Open Step 6-1 Close Step 6-3 45052-01 • 04/26/10 • Hunter Fan Company...
  • Page 14 Exceeding the wattage limit marked on the MAX wattage Screw sticker affixed to the light socket(s) may result in fire hazard or improper operation. If lights do not appear to be operating properly, see the troubleshooting section. 45052-01 • 04/26/10 • Hunter Fan Company...
  • Page 15: Completing Your Installation With Or Without A Bowl Light Fixture

    7-9. Attach the extra pull chains (included) to the light and fan pull chains using the breakaway Cover Plate connector. (You may find the breakaway Finial connector on the end of the extra chain.) Breakaway Connector 45052-01 • 04/26/10 • Hunter Fan Company...
  • Page 16 7-16. Install the switch housing cap and plug button to the lower switch housing. Steps 7-13 – 7-15 7-17. Once you have uninstalled the light fixture, continue with Step 7-1. Plug Button Step 7-16 45052-01 • 04/26/10 • Hunter Fan Company...
  • Page 17: Ceiling Fan

    To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 45052-01 • 04/26/10 • Hunter Fan Company...
  • Page 18: Troubleshooting

    If you need parts or service assistance, please call 888-830-1326 (In Canada, call 1-866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy #400 Memphis, Tennessee 38016 45052-01 • 04/26/10 • Hunter Fan Company...

This manual is also suitable for:

23723

Table of Contents