Fan ......14 use a solid-state speed control with this fan. Use only Hunter speed 9 •...
Page 3
Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling both Installer’s Choice mounting methods.
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer Steps 2-2 – 2-4 Ceiling Peak Ceiling Peak Large Large Opening Opening 3” Screw LEFT RIGHT Step 2-3 (Angled Ceiling Only) 45013-01 • 06/16/11 • Hunter Fan Company...
(Rotate the fan until you hear the notch pop into place.) Indent Go to 4 • Wiring the Fan. Steps 3-4 – 3-5 WARNING: Fan may fall if not assembled as directed in these installation instructions. 45013-01 • 06/16/11 • Hunter Fan Company...
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 45013-01 • 06/16/11 • Hunter Fan Company...
5-6. Twist canopy trim ring clockwise to secure the canopy. Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counter clockwise until it releases from canopy. Step 5-3 Step 5-4 Canopy Step 5-5 Screw 45013-01 • 06/16/11 • Hunter Fan Company...
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Install the grommets into the blades by hand. Step 6-1 (Detail) 6-2. Place each blade between a blade iron and medallion. Install three blade screws to attach the medallion to the blade iron.
7 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture.
Page 11
Align the side screw holes in the upper and Plug lower switch housings. Attach the lower switch housing Connector Detail to the upper switch housing with three housing assembly screws. Housing Assembly Screw 45013-01 • 06/16/11 • Hunter Fan Company...
Page 12
7-13. Thread the light pull chain through the finial and screw the finial onto the threaded rod end until tight. Light Kit Metal Disc Threaded Rod Glass Bowl Cover Plate Breakaway Connector Steps 7-9 – 7-13 Finial 45013-01 • 06/16/11 • Hunter Fan Company...
Page 13
7-20. Install the switch housing cap and plug button to the lower switch housing. 7-21. Once you have uninstalled the light fixture, continue with step 7-6. Male Dummy Terminal Female Dummy Terminal Plug Button Step 7-20 45013-01 • 06/16/11 • Hunter Fan Company...
To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 45013-01 • 06/16/11 • Hunter Fan Company...
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 45013-01 • 06/16/11 • Hunter Fan Company...