Programming Dial-Out Functions; Call Forward Phone Number Programming; Call Forward - Enable / Disable 29 2.5.2 * 1; Preprogrammed Phone Numbers "Dial A Phone Number - DKS 1812 Classic Installation & Owner's Manual

2.5 Programming Dial-Out Functions

2.5.1 Call Forward Phone Number Programming

These steps program the call forwarding telephone number into the 1812 memory. Call forwarding can only be used when
the 1812 is programmed in phone mode (see 2.3.1). To Enable/Disable call forward see 2.5.2 below. The call forward
phone number can also be set up for a time zone activation (2.4.5).
2.5.2 Call Forward - Enable / Disable
This programming sequence Enables/Disables the call forward feature. You must have a call forward phone number
programmed into the 1812 memory (See 2.5.1 above). Call forward can only be used when the 1812 is programmed in
phone mode (see 2.3.1). Call forward MUST be disabled if you are going to use a call forward time zone activation (2.4.5).

2.5.3 Preprogrammed Phone Numbers "Dial a Phone Number"

The 1812 has the capability of operating as an auto-dialer system and can store up to 3 phone numbers in its memory.
When a visitor enters a "Directory number" 01, 02, or 03 on the system keypad, the 1812 will call the preprogrammed
phone number programmed for that specific directory number. This feature can only be used when the 1812 is
programmed in phone mode (see 2.3.1).
Note: These phone numbers function differently than the call forward phone number that was programmed in 2.5.1.
To program the phone number that will be called when "01" is pressed on the system keypad:
Note:
Press
*
Press
*
1812-065-V-12-14
1. Press 1 0 and enter the MASTER CODE. [
*
2. If the forwarding phone number is 11 digits:
Press 1 then enter the area code, then press
If the forwarding phone number is 10 digits:
Press # then enter the area code, then press
If the forwarding phone number is 7 digits:
Press # # # #, then press
3. Enter the seven-digit phone number, then press
Note: 7 digits, no dashes.
4. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
1. Press 1 4 and enter the MASTER CODE. [
*
2. Press 0 to disable call forward, OR press 1
*
3. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
1. Press 2 1 (See note below) and enter the MASTER CODE. [
*
2. If the phone number is 11 digits:
Press 1 then enter the area code, then press
If the phone number is 10 digits:
Press # then enter the area code, then press
If the phone number is 7 digits:
Press # # # #, then press
3. Enter the seven-digit phone number, then press
Note: 7 digits, no dashes.
4. Press 0 # TOGETHER to end. [0 # (beeeeeep)]
2 2 in step 1 to program the phone number called when "02" is pressed on the system keypad.
2 3 in step 1 to program the phone number called when "03" is pressed on the system keypad.
1 0 _ _ _ _ (beep)]
*
. [ 1 _ _ _
*
. [ # _ _ _
*
. [ # # # # (beep)]
* *
. [ _ _ _ _ _ _ _
*
1 4 _ _ _ _ (beep)]
*
to enable call forward. [ _
*
. [ 1 _ _ _
*
. [ # _ _ _
*
. [ # # # # (beep)]
* *
. [ _ _ _ _ _ _ _
*
(beep)]
*
(beep)]
*
(beep)]
*
(beep)]
*
2 1 _ _ _ _ (beep)]
*
(beep)]
*
(beep)]
*
(beep)]
*
29