Connection Troubleshooting - Technicolor MediaAccess TG650s Setup And User Manual

9 SUPPORT

9.3 Connection Troubleshooting

Ethernet LED does not light up
Make sure that:
The Ethernet cable is securely connected to the Ethernet port on your MediaAccess Gateway and your computer.

You are using the correct cable type for your Ethernet equipment, that is at least UTP CAT5 with RJ-45 connectors.

For the Gigabit Ethernet ports you need at least CAT5E. But it is recommended to use CAT6.
102
DMS-CTC-20111123-0002 v1.0