Schwinn 830/Journey 8.0 Assembly Manual / Owner's Manual page 28

Export Workout Results to USB Flash Drive
This fitness machine is equipped with a USB Port and can export your Workout Results to a USB Flash Drive. With the
Workouts exported from the fitness machine, connect the USB Flash Drive to a computer and upload the file to your Schwinn
Connect
TM
account.
Note. USB Flash Drives must be formatted in FAT32 for proper functionality.
1. From the Power-Up screen, push the User button to select the desired User Profile.
2. Insert the USB Flash Drive into the USB Port on the Console.
3. The Console will display "SAVING TO USB", and then "DO NOT REMOVE". The current User Profile will begin to flash,
showing the Workout Results are being exported to the USB Flash Drive. Do not remove the USB Flash Drive until the
User Profile does not flash and the Console displays "REMOVE USB".
Note: If the Workout Results on the USB Flash Drive are current, the Console will not export the file again. As more
workouts are completed, the Console will take longer to export all of the Workout Results. For longer exports, the
Console will display an export status count ( exported workouts / total number of workouts ).
4. When the export is complete the User Profile will stop flashing, the Console will display "USB COMPLETE", followed by
the "REMOVE USB" prompt. It is now safe to remove the USB Flash Drive.
5. The Console will display the Power-Up Mode screen.
If a Workout is completed with a USB Flash Drive already inserted, the Console will not export the new Workout Results until
the Console exits the Results mode and displays the Power-Up Mode screen.
Track Your Results at www.schwinnconnect.com
Take advantage of Schwinn Connect
TM
to see your progress over time and share your data with MyFitnessPal ®. Review your
workouts and results away from the machine when convenient for you. Schwinn Connect
TM
allows for a workout value to be
selected and have it graphed for weekly, monthly, or yearly comparison review.
If using a USB Flash Drive to import workout results to Schwinn ConnectTM:
1. Insert the USB Flash Drive with your workout data into a device connected to the internet.
2. Sign in to Schwinn Connect
TM.
3. Click the Upload button on the web site.
4. In the Upload File window, locate your USB Flash Drive. Select the workout data file from it, and click the upload button.
Your workout data will upload into your account.
5. To sync your workout data with MyFitnessPal ®, select the Menu option in the upper left corner of the web page and
select the "Sync to MyFitnessPal ®" option.
Note: Schwinn Connect
TM
will automatically sync your workouts with MyFitnessPal ® after the initial syncing.
A User's Guide for Schwinn Connect
TM
can be found online at www.schwinnconnect.com.
Remote Heart Rate Monitor
Monitoring your Heart Rate is one of the best procedures to control the intensity of your exercise. Contact Heart Rate (CHR)
sensors are installed to send your heart rate signals to the Console. The Console can also read telemetry HR signals from a
Heart Rate Chest Strap Transmitter that operates in the 4.5kHz - 5.5kHz range.
Note: The heart rate chest strap must be an uncoded heart rate strap from Polar Electro or an uncoded POLAR® compat-
ible model. (Coded POLAR ® heart rate straps such as POLAR ® OwnCode ® chest straps will not work with this equip-
ment.)
lf you have a pacemaker or other implanted electronic device, consult your doctor before using a wireless chest strap or
other telemetric heart rate monitor.