Table of Contents
Advertisement
Avoid fi_e
_d o_
ebc£ric sh_k
Do no_ use a_ ÷_enson
cord
or an adapter
p_ug Do no_ remove
any
p
f_om _he
_c_rd.
r supply
PROHIBTION
o:° Do not attempt to remove or repair any
component
unless instructed by factory.
o:° Make sure that the unit is not resting on or
against the electrical cord and the plug.
o:° Do not store any flammable and explosive gas
or liquids inside the unit.
o:° Do not attempt to alter or tamper with the
electrical cord.
INSTALLATION
IMPORTANT!!!
PLEASE READ BEFORE
INSTALLATION
o:.
Avoid direct
sun rays.
o:.
Make
sure all accessories
are installed
(i.e
shelves,
shelf clips, casters)
before
plugging
the
unit in.
o:.
Please read through
the manual
in its entirety.
CABINET LOCATION GUIDELINES
o:o Install the unit on strong and leveled surfaces
•
Unit may make unpleasant noises if surface
is uneven
•
Unit may malfunction
if surface is uneven
o:o Install the unit in an indoor, well-ventilated
area
•
Unit performs more efficiently
in a well-
ventilated
area
•
For best performance,
please maintain
clearance of 4" on the back of the unit.
•
Outdoor use may cause decreased
efficiency and damage to the unit.
o:o Avoid installation in a high humidity and/or
dusty area
•
Humidity could cause unit to rust and
decrease efficiency of the unit
•
Dust collected on the condenser coil will
cause unit to malfunction.
Clean the
condenser at least once a month with a
brush or a clean cloth.
o:o Select a location away from heat and
moisture-generating equipment
•
High ambient temperatures
will cause the
compressor to overwork, leading to higher
energy bills and gradual breakdown of the
unit
o:.
The refrigeration
system
operates
most
efficiently
when installed
in an area with
cool,
dry air circulation.
o:.
There must be at least 6 inches of clearance
on
both
sides and the back of the cabinet.
o:.
Select a location
away from
the heat and
moisture
generating
equipment
such as stoves,
ovens,
etc.
ELECTRICAL
Please ensure that the required voltage of the
compressor is being supplied at all times. Low or
high voltage can detrimentally
affect the
refrigeration
unit. All units should be plugged into a
grounded and properly sized electrical outlet with
appropriate
overcurrent
protection.
Please refer to
Hide quick links:
Advertisement
Table of Contents
