Product Registration; Safety/Warning - Kelvinator KCBM23FS Installation Instructions Manual

READ AND SAVE THESE INSTRUCTIONS 242230200
(January 2012)
Product Registration
These instructions include information which is
intended to assure the operator of correct
installation, operation and service. Before
attempting installation, adjustment or
maintenance, be certain of the following:
4* That you have read and fully understand the
instructions.
o:* That you have all the tools required and are
trained to use them.
o:* That you have met all installation and usage
restrictions and are familiar with the functions
and operations of the unit.
o:* That you follow all instructions exactly as given.
All the fittings, measurements, recommendations
and procedures are significant. Substitutions and
approximations must be avoided. Improper
handling, maintenance, installation and adjustment,
or service attempted by anyone other than a
qualified technician, may void the future warranty
claims and cause damage to the unit and/or result
in injury to the operator and/or bystanders.
No
Seda_ No
h_stat_a_ion Date
In,voice Date
Sta_t_up Da_e
Register Your Product
The self-addressed PRODUCT REGISTRATION CARD
(shown above) should be filled in completely,
signed and returned to the address provided.
SAFETY / WARNING
Please pay close attention to the safety notices in
this section. Disregarding these notices may lead
to serious injury and/or damage to the unit.
ATTENTION
o:* To minimize shock and fire hazards, be sure not
to overload outlet. Please designate one outlet
for your unit.
o.*o Do not use extension cords.
o.*o Do not put your hands under the unit when the
unit is required to be moved.
o.*o When the unit is not in use for a long period of
time, please unplug the unit from the outlet.
o.*o After unplugging the unit, wait at least 10
minutes before re-plugging it. Failure to do so
could cause damage to the compressor.
UNPLUG CORD
Record your Model and Serial Numbers
Record the model number and serial number of this
appliance in the space provided below (the serial
plate is located inside the cabinet compartment).
o:o To minimize shock and fire hazards, please do
not plug or unplug the cord with wet hands.
o:o During maintenance and cleaning, please
unplug the unit.
PROPER GROUNDONG REQUIRED
o:* To minimize shock and fire hazards, make sure
that the unit is properly grounded.