Advertisement
Instructions for Installation
1.
Do not tilt the refrigerator for more than 45 from the upright position when
moving it. Avoid collision and violent vibration during transportation.
Do not apply force to any part such as the condenser, the door and its handle
in order to prevent
the re
frigerator from deforming, as this will influence the
performance.
2.
Ensure that there is enough space around the refrigerator in order to let it work well.
3.
The refrigerator should be kept away from high temperature ,sunshine or humid
conditions.
4.
The refrigerator should be placed on solid floor to avoid much noise.
5..
For your safety and protection, this unit is grounded through the power cord plug
when plugged into a matching wall outlet. If you are not sure whether your wall
outlet properly grounded, please consult a qualified electrician..
3
Cautions for Safety
.1.
It must be checked that the
voltage
before the refrigerator is used.
2.
The power plug should have its own separated socket in order to prevent the
electric wire from being over heated by other plugs.
3
Don not allow children to tamper with the controls or play with the product.
Don not hang heavy objects onto the door of the product to avoid the refrigerator
4
turning over..
It is dangerous to alter the specifications or attempt to modify this products
5
in any way
Do not place sealed container or carbonated liquids such as fizzy drinks into
6
the freezer as it creates pressure on the container which may cause it to explode
resulting to damage to the freezer or people.
7.
Do not splash water on to the refrigerator. Otherwise it may cause malfunc
-tions of the refrigerator or electric shock.
Do not store flammable materials such as alcohol, gasoline, LP gas and glue
8
etc, in the refrigerator.
Ice cubes and ice lollies should not be consumed immediately after removal from
9
the freezer as it may result in low temperature skin abrasions.
When you change the light bulb or when the refrigerator is not in use for long
10
periods, disconnect it from the electricity supply..
11
Wait for 5 minutes before restart the unit after the power supply blackout..
Operation
1.
When operating the refrigerator for the first time , set the thermostatic dial at 3,
connect the electric wire and
run it without loading any food. Usually this takes
2 or 3 hours. Then set the thermostatic dial at the desired setting and place
foods into the refrigerator .
used should be the same as the rated voltage
4
Advertisement
