Cleaning And Maintenance; Instructions For Installation - Kelvinator KI420BFM2 User Manual

Enlarged version

Cleaning and Maintenance:

When cleaning the refrigerator , disconnect the electric wire . Rub it carefully

with a piece of cloth soaked with neutral cleanser , then wipe it clean with fresh

Water. Do not wash the refrigerator with water directly to prevent the unit from

rust and breakdown.

Never use acids , chemical solution , thinner , gasoline or the likes to clean the

refrigerator because they may damage the painting cover and plastic parts of it

Once or twice a year dust the compressor at the back of the appliance with a

brush or vacuum cleaner, as an accumulation of dust will affect the performance

of the appliance and cause excessive electricity consumption.

Do not tilt the refrigerator by more than 45 from an upright position when moving it.

Avoid collision and violent vibration during transportion.

Do not apply force to any part such as the condenser, the door and its handle

in order to prevent

be affected.

Ensure that there is enough space around the refrigerator in order to let it work well.

Detergent

The refrigerator should be kept away from high temperature ,sunshine or humid

conditions.

The refrigerator should be placed on solid floor to avoid much noise.

5..

For your safety and protection, this unit is grounded through the power cord plug

when plugged into a matching wall outlet. If you are not sure whether your wall

outlet properly grounded, please consult a qualified electrician..

the re

frigerator from deforming, or else its performance will

Table of Contents