Summary Of The Functions In The Initial State (Entering Seam Programs) - Pfaff 3588-04/020 Instruction Manual

11

Summary of the functions in the initial state (entering seam programs)

.06.03
The function CREATE / MODIFY PROGRAM is only accessible when the
machine is in its basic position. If required, a code number must be entered, a
sewing pattern inserted and a program number must be selected.
INPUT mode
Input menu
2 - CREATE / MODIFY PROGRAM
Step-by-step forwards
Step-by-step backwards
Presser foot up/down
Block functions
1 - MARK START OF BLOCK
2 - MARK END OF BLOCK
3 - MANIPULATE BLOCK
4 - MOVE BLOCK
5 - DELETE BLOCK
Pattern functions
1 - MOVE PATTERN
2 - MANIPULATE PATTERN
(SYMMETRY POINT WITH TRANSFER KEYS)
3 - MANIPULATE PATTERN
(SYMMETRY POINT WITH NUMERIC KEYS)
Reference point for coordinates
Delete
Change
Activate Insert (see chapter 11.06.05)
Input mode functions
1 - SCALE UP FACTOR FOR X-AXIS
2 - SCALE UP FACTOR FOR Y-AXIS
3 - ROTATION ANGLE
4 - MIRROR
1 - SCALE UP FACTOR FOR X-AXIS
2 - SCALE UP FACTOR FOR Y-AXIS
3 - ROTATION ANGLE
4 - MIRROR
1 - SCALE UP FACTOR FOR X-AXIS
2 - SCALE UP FACTOR FOR Y-AXIS
3 - ROTATION ANGLE
4 - MIRROR
11 - 22