Pfaff 3588-04/020 Instruction Manual page 70

7 OTHER FUNCTIONS
Opens a menu with various other functions:
1 - WRITE MACHINE DATA ON DISK
2 - READ MACHINE DATA FROM DISK
3 - CARRY OUT COLD START
4 - DISPLAY SOFTWARE STATUS
5 - CONTRAST SETTING OF DISPLAY
6 - CHANGE CODE NUMBER
1 2 3 4 5 6 7
Fig. 11 - 34
1 WRITE MACHINE DATA ON DISK
Writes the data of the machine configuration (file name: MDAT) on a disk.
For a table of all transferable machine data please refer to
chapter 14.03.02 Table of machine data (MDAT).
READ MACHINE DATA FROM DISK
2
Reads machine data which are stored on a disk into the machine memory (e.
g. after a cold start).
CARRY OUT COLD START
3
Carries out a cold start.
When carrying out a cold start, all settings except the zero point and the
machine configuration settings are reset to boot-up values. All programs in
the machine memory are deleted.
DISPLAY SOFTWARE STATUS
4
Displays the date of origin of the machine software and the software
versions of various control units.
CONTRAST SETTING OF DISPLAY
5
Do not lower the contrast setting to such an extent that the
display becomes illegible!
This function lets you change the contrast setting of the display.
CHANGE CODE NUMBER
6
After a cold start, the code number is 3588. This function lets you choose
your own code number between 0000 - 9999.
Functions which are secured by a code number can only be
selected via the respective code.
Input mode functions
Enter
8 9 0
Esc
Clear
11 - 20