Displaying Information - Fujitsu SCENICVIEW P17-3P Operating Manual

Operation
Adjusting the functions in the Advanced menu
Input select
DDC-CI
ResolutionNotifier
Factory Recall

Displaying information

26
Calling up the Advanced window
Selecting the input signal
This function allows you to switch the monitor from analog to digital mode
and vice versa when two signal sources are connected,
provided the graphics card supports this function.
Activate/deactivate the DDC-CI function
On = DDC-CI function is activated (default setting)
Off = DDC-CI function is deactivated
Displaying screen information
The optimum resolution for this monitor is 1280 x 1024 pixels. With the
function activated (On), a message appears on the screen after approx. 30
seconds if a different resolution is set.
Change the resolution to 1280 x 1024 to achieve optimum picture quality.
With the function deactivated (Off), no message appears.
Activates the factory settings
This function is used to reset all settings to the factory settings. The user is
not prompted to confirm the changes.
Press the SELECT/MENU
Auto Processing is displayed.
Call the Information setting window
With this function the model designation, serial number, resolution, H/V
frequency, input signal and polarity of the synchronisation signal are
displayed.
button to execute this function. The message
A26361-K1240-Z120-7619, edition 1