Mounting The Ptc-870Im To A Wall Or A Horizontal Surface - Symbol PTC-870IM User Manual

Figure 6. Mounting the PTC-870IM
Mounting handle
Mounting bracket
For freezer units, make sure you
leave enough clearance to replace
the desiccant cartridge when
necessary.
Spacer
3. Slide a spacer onto each mounting handle bolt.
See Figure 6.
4. Insert the PTC's mounting handle bolts into the
holes at the top of the mounting bracket and
partially tighten them.
5. Adjust the PTC for the best viewing angle.
6. Tighten the mounting handles securely.
Mounting the PTC-870IM to a wall or a
horizontal surface
Use the four M6x1 mounting holes on the back of the
PTC-870IM, four M6x1 screws, and four .375-inch
(.95-centimeter) long spacers to mount the PTC to a
wall or a horizontal surface instead of to a warehouse
vehicle (if desired).
49