Component Video (Better) - Insignia NS-55D420NA16 User Manual

Component video (better)

Note
Cables are often color-coded to match color-coded jacks.
On your TV
Component Audio cable
video cable connectors
connectors
Component Analog
video jacks audio jacks
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect a component video cable (not provided) to the VIDEO/Y, P
COMPONENT OUT jacks on the DVD or Blu-ray player.
3 Connect an audio cable (not provided) to the L and R AUDIO jacks on the back of your TV and to the L and R AUDIO
OUT jacks on the DVD or Blu-ray player.
Important
4 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to select Component/AV, then press ENTER.
20
Back of TV
• The VIDEO/Y, P , and P
B
device) share the L and R AUDIO jacks with the VIDEO/Y jack (used to
connect an AV device). You can only connect one component video or
AV device at a time. We suggest upgrading to HDMI if your DVD or
Blu-player supports it.
• When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
www.insigniaproducts.com
Component video
cable
B
video jacks (used to connect a component
R
Insignia 55" 1080p 60Hz LED TV
DVD or Blu-ray
Audio cable
, and P jacks on the back of your TV and to the
R
player