Installing The Stand Or Wall-Mount Bracket; Installing The Stand - Insignia NS-55D420NA16 User Manual

NS-55D420NA16 Insignia 55" 1080p 60Hz LED TV

Installing the stand or wall-mount bracket

• If you want to place your TV on a table or in an entertainment center, go to
• If you want to mount your TV on a wall, go to
Notes

Installing the stand

1 Align the stand column with the stand base, then secure the column to the base with the four provided
ST4 × 16 mm screws (the long screws).
2 Carefully place your TV face-down on a cushioned, clean surface to protect the screen.
• If you plan to wall-mount your TV, do not install the stand.
• Store the stand and stand screws in case you decide to use the stand in
the future.
Screw type
ST4
www.insigniaproducts.com
"Installing a wall-mount bracket. "
Screw length # of screws
16 mm
"Installing the stand. "
4
5