USER GUIDE 32"/55" 1080p, 60Hz, LED Insignia Roku TV Version 6.2 NS-32DR420CA16/NS-55DR420CA16 Illustrations in this guide are provided for reference only and may differ from actual product appearance. Product design and specification may be changed without notice. Before using your new product, please read these instructions to prevent any damage.
CHILD SAFETY PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. As you enjoy your television, please note that all televisions - new and old- must be supported on proper stands or installed according to the manufacturer's recommendations.
Important Safety Instructions 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use CAUTION caution when moving the cart/apparatus combination to RISK OF ELECTRIC SHOCK avoid injury from tip-over.
NS-32DR420CA16/ NS-55DR420CA16 Handling the LCD panel Outdoor antenna grounding • Your TV’s screen is made of glass. Do not drop your If an outside antenna or cable system is connected to TV or hit, jolt, or press hard against the LCD panel. If your TV, make sure that the antenna or cable system is the screen breaks, be careful of broken glass.
Page 9
End of life directives Non-active pixels Your TV may contain materials that are regulated for The LCD panel contains almost 3 million thin film environmental reasons. Your TV also contains transistors, which provide exceptionally sharp video materials that can be recycled and reused. To help quality.
7 Take charge with a smartphone or tablet • Control your Insignia Roku TV with the included remote or from your smartphone or a tablet with the free mobile app for iOS, Android, and Windows devices.Browse channels, view My Feed, and even search with voice via free mobile app.
32"/55" 1080p, 60Hz, LED Insignia Roku TV Installing the stand or wall-mount bracket • If you want to place your Insignia Roku TV on a table or in an entertainment center, go to Installing the stand. • If you want to mount your Insignia Roku TV on a wall, go to Installing a wall-mount bracket.
Page 12
NS-32DR420CA16/ NS-55DR420CA16 2 Align the TV stand(s) with the screw holes on the bottom of your Insignia Roku TV, then secure the stand(s) to your Insignia Roku TV with the four provided screws. Notes • The 32-inch model has one stand.
1 Carefully place your Insignia Roku TV face-down on a cushioned, clean surface to protect the screen. 32-inch model 55-inch model 2 If the TV stand(s) is installed, remove the four screws that secure the stand(s) to your Insignia Roku TV. 32-inch model 55-inch model...
Page 14
3 Remove the screws from the mounting holes on the back of your Insignia Roku TV. 4 Attach the wall-mount bracket to your Insignia Roku TV using the mounting holes on the back of your Insignia Roku TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your Insignia Roku TV.
TV components Status indicator Status TV condition Meaning indicator Your Insignia Roku TV has built-in controls for adjusting basic settings and several sets of jacks for On (screen is Screen is communication connecting devices to your Insignia Roku TV. active)
NS-32DR420CA16/ NS-55DR420CA16 Buttons Side jacks The controls on your Insignia Roku TV enable you to perform simple functions, but are not a substitute for the remote control. Your Insignia Roku TV has seven buttons on the right edge of the screen. From top to...
32"/55" 1080p, 60Hz, LED Insignia Roku TV Back jacks # Item Description Connect an HDMI device to this jack. For more information, see HDMI (best) on pages 16, 20, Connecting a computer on page 24. 1 HDMI1/ARC Connect an ARC-enabled home theater receiver to this jack.
If your Insignia Roku TV is in Standby mode, turns power on. When playing streaming content, alternately pauses and (power) If your Insignia Roku TV is on, puts your Insignia Roku TV in (play/pause) plays the content. Standby mode.
Page 19
Dedicated buttons show the logo of a featured streaming content provider. Pressing a button turns your Insignia Roku TV on (if your Insignia Roku TV is not already on), and if your Insignia Roku TV is operating and is connected to the...
Good • The external audio/video devices shown may be different from your devices. If you have questions, refer to the documentation that came with your devices. • Always turn off your Insignia Roku TV when connecting external devices. www.insigniaproducts.com...
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI cable (not provided) to an HDMI jack on the side or back of your Insignia Roku TV and to the HDMI OUT jack on the cable or satellite box.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an AV cable (not provided) to the VIDEO jack and L and R (audio) jacks on the back of your Insignia Roku TV and to the AV and audio out jacks on the cable or satellite box.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT / CABLE IN jack on the back of your Insignia Roku TV and to the coaxial out jack on the cable or satellite box.
1 Make sure that your Insignia Roku TV’s power cord is unplugged and all connected devices are turned off. 2 Connect a coaxial cable (not provided) to the ANT / CABLE IN jack on the back of your Insignia Roku TV and to the antenna or cable TV wall jack.
1 Make sure that your Insignia Roku TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an HDMI cable (not provided) to an HDMI jack on the side or back of your Insignia Roku TV and to the HDMI OUT jack on the DVD or Blu-ray player.
1 Make sure that your Insignia Roku TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an AV cable (not provided) to the VIDEO jack and L and R (audio) jacks on the back of your Insignia Roku TV and to the AV OUT jacks on the DVD or Blu-ray player.
1 Make sure that your Insignia Roku TV’s power cord is unplugged and the game console is turned off. 2 Connect an HDMI cable (not provided) to an HDMI jack on the side or back of your Insignia Roku TV and to the HDMI OUT jack on the game console.
• When you connect the audio using the L and R (audio) jacks, the audio output is analog. 3 Plug your Insignia Roku TV’s power cord into a power outlet, then turn on your Insignia Roku TV and the game console.
1 Make sure that your Insignia Roku TV’s power cord is unplugged and the computer is turned off. 2 Connect an HDMI cable (not provided) to an HDMI jack on the side or back of your Insignia Roku TV and to the HDMI OUT jack on the computer.
NS-32DR420CA16/ NS-55DR420CA16 Connecting a USB flash drive You can use the USB jack on your Insignia Roku TV to view photos and videos and listen to music stored on a USB flash drive. Side of TV USB flash drive 1 Plug a USB flash drive into the USB port on the side of your Insignia Roku TV.
32"/55" 1080p, 60Hz, LED Insignia Roku TV Connecting headphones When you connect headphones, your Insignia Roku TV speakers are muted and sound only plays through the headphones. Warning Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound.
1 Make sure that your Insignia Roku TV’s power cord is unplugged and the digital speaker system or sound bar is turned off. 2 Connect a digital optical audio cable (not provided) to the SPDIF jack on the side of your Insignia Roku TV and to the digital optical AUDIO IN jack on the digital speaker system or sound bar.
32"/55" 1080p, 60Hz, LED Insignia Roku TV Digital audio using the HDMI 1/ARC jack Your Insignia Roku TV can send sound to an ARC device, like an AV receiver, to create a home theater that uses two or more speakers.
Audio cable jack 1 Make sure that your Insignia Roku TV’s power cord is unplugged and the analog speaker system or sound bar is turned off. 2 Connect an audio cable (not provided) to the jack on the side of your Insignia Roku TV and to the AUDIO IN jacks on the analog speaker system or sound bar.
Just remember to use the best connection types available for the best picture and sound. For information about connection types, see What connection should I use? on page 15. For information about TV settings for home theaters, see Using your Insignia Roku TV in a home theater on page 62. www.insigniaproducts.com...
32-inch model 55-inch model 1 Connect the AC power cord to the power connector on the back of your Insignia Roku TV. 2 Connect the other end of the cord to a power outlet. Caution •...
32"/55" 1080p, 60Hz, LED Insignia Roku TV Installing remote control batteries Open the back of your Insignia Roku TV remote control and insert two AAA batteries, observing the proper orientation. Reattach the back cover. Insignia Roku TV remote control on page explains how to use the remote control in each of your Insignia Roku TV’s...
Guided Setup With the preliminaries out of the way, it’s time to turn on your Insignia Roku TV. As your Insignia Roku TV starts for the first time, it leads you through Guided Setup, which configures your Insignia Roku TV before you start to use it.
1 Press OK or RIGHT on the remote control to go to the next screen: 2 Press OK to select Set up for home use. Home mode is the right choice for enjoying your Insignia Roku TV. It provides energy saving options as well as access to all features of your Insignia Roku TV.
• Connect to the Internet later —If you’re unable to connect to the Internet, that’s OK. You can skip this step and use your Insignia Roku TV to watch broadcasts, play games, and watch DVDs. If you want to connect later, it's easy. We’ll...
Page 41
Use the UP or DOWN buttons to highlight your time zone, and then press OK. 7 As soon as your Insignia Roku TV is able to connect to the Internet, it downloads and installs its first software update, and then restarts.
Page 42
Roku products are sold. After it adds your selected streaming channels, your Insignia Roku TV helps you set up the devices that you’re connecting to it, such as a cable box, Blu-ray player, or game console: 9 Press OK or RIGHT to proceed: www.insigniaproducts.com...
Page 43
32"/55" 1080p, 60Hz, LED Insignia Roku TV 10 Connect all the devices you plan to use with your Insignia Roku TV, turn them all on, and then select Everything is plugged in and turned on. Your Insignia Roku TV now takes you step by step through each of its inputs and asks what kind of device you have connected.
NS-32DR420CA16/ NS-55DR420CA16 Connected Insignia Roku TV Home screen Here is a typical Home screen from an Insignia Roku TV that’s connected to the Internet and paired with a Roku account. Hint–Press Press Highlighted RIGHT to see options when item–Press OK to...
OK to assign that name to the tile. • Add streaming channels by browsing the Roku Channel Store (after connecting your Insignia Roku TV to the Internet to add the Streaming Channels option to the menu).
But what if I didn’t connect my Insignia Roku TV? What if you went through Guided Setup and chose Connect to the Internet later? No worries. Your Insignia Roku TV makes it easy to connect whenever you want. As you move around the Home screen, you’ll see several places where you can start the connection process.
2 On the Home screen, select the Antenna TV tile. 3 Read the simple on-screen instructions and select Start setup. 4 If prompted, select your time zone. You'll only need to do this if your Insignia Roku TV can’t figure out your time zone from your Internet connection.
Page 48
5 When prompted, select whether to add analog channels 3 and 4 (to enable you to connect older set top boxes, VCRs, or game consoles). 6 Wait while your Insignia Roku TV scans for broadcast (antenna TV) stations... … and then cable TV channels.
Page 49
32"/55" 1080p, 60Hz, LED Insignia Roku TV 7 When the channel scans finish, your Insignia Roku TV shows the number of channels it added. Scanning for channels can take several minutes. Repeat the channel scan from time to time to make sure you are receiving all of the latest channels.
Insignia Roku TV status light Your Insignia Roku TV has a single status light on the front panel. It goes on and off and blinks in different ways depending on the status of your Insignia Roku TV, as shown in the following table:...
32"/55" 1080p, 60Hz, LED Insignia Roku TV Viewing program information To view information about the current program, press OK. Your Insignia Roku TV displays a banner at the bottom of the screen with as much information as is available in the program data stream.
Playing content from USB storage devices Your Insignia Roku TV has a USB port that can be used to play personal music, video, and photo files from a USB flash drive or hard disk. If your Insignia Roku TV is connected to the Internet, your Home screen has the Roku Media Player tile.
• Audio mode—Adjusts the sound quality output from the your Insignia Roku TV speakers. This setting applies across your entire Insignia Roku TV; that is, to all TV inputs. It does not affect the sound quality for headphones, HDMI (ARC), or SPDIF (TOSLINK) connectors.
• Game mode—Controls whether Game mode is on or off. When On, your Insignia Roku TV performs less image processing and has less input lag. When Off, your Insignia Roku TV may perform more image processing and has more input lag, which is less desirable for action games. Available only for HDMI and AV inputs.
The Roku Feed is available only if your Insignia Roku TV is connected to the Internet. Searching for movies & shows Searching for movies and shows across multiple streaming channels is one of the unique features of your Insignia Roku TV. Within a single search operation, you can search by: •...
• If there is a one-time or recurring fee associated with using the streaming channel, you must agree to the terms and conditions, accept the fee, and-if you created one when you activated your Insignia Roku TV, enter your Roku PIN code to authorize the charges.
32"/55" 1080p, 60Hz, LED Insignia Roku TV Customizing your Insignia Roku TV There are several things you can do to personalize your Insignia Roku TV. Rearrange tiles Whenever you add a TV input tile, it’s added at the top of your Home screen. Whenever you add a new streaming channel from the Roku Channel Store, it’s added at the bottom of your Home screen.
If you need to see or hear the highlighted channel, wait a couple of seconds for your Insignia Roku TV to start playing the channel’s picture and sound. Also note that if you've enabled parental controls and the program on the current channel is blocked, you won’t see a picture or hear sound while editing the channel lineup.
Change themes Another way to customize your Insignia Roku TV is to change its theme. The theme establishes the look and feel of your Insignia Roku TV through colors, designs, and fonts. Themes are available only when your Insignia Roku TV is connected to the Internet.
Configure power settings Power settings let you set up your Insignia Roku TV so that it turns on to the location you choose. Power settings also help your Insignia Roku TV save energy by automatically turning it off under certain conditions.
Similarly, within the main group, content types can be individually blocked. For example, you can block just coarse language in shows with a TV-PG rating. If you do, then your Insignia Roku TV also blocks shows with coarse language in the higher ratings (TV-14 and TV-MA).
Page 62
Parental controls. When your Insignia Roku TV downloads a new Rating Region Table, it adds a new option to the list of rating types: Other ratings. If you see this option in the Parental controls screen, you have tuned to a station that has implemented a new rating table.
• When a new show comes on the channel you are watching and its rating exceeds your settings. When a program is blocked by parental control settings, your Insignia Roku TV displays a blocked message: Whenever this blocked message appears, both the video and audio of the show are blocked, as well as program data that would normally appear in the area at the bottom of the screen.
2 Use the arrow buttons to enter your PIN code, and then press OK to select Unblock everything. After unblocking shows that have been blocked, all blocking is disabled for two hours or until you turn off your Insignia Roku TV.
32"/55" 1080p, 60Hz, LED Insignia Roku TV More settings This section describes the features and settings of your Insignia Roku TV that were not covered in the other parts of this guide. Changing network settings If needed, you can change your network settings at any time. For example, if you change the name of your wireless network (its SSID) or its password, you will need to change your Insignia Roku TV’s settings so that it can continue to...
This setting applies to Antenna TV, the AV input, and streaming channels. • If you choose When mute, your Insignia Roku TV displays captions only when the sound is muted. This setting applies to Antenna TV, the AV input, and streaming channels.
Using your Insignia Roku TV in a home theater Your Insignia Roku TV has several features that make it an ideal TV for a home theater. But you might not notice them because they remain in the background until you decide to use them.
CEC devices, and then press OK to start the discovery process. When finished, your Insignia Roku TV displays a list of CEC devices that are connected to each HDMI input, as well as any devices that had previously been connected. Your Insignia Roku TV remembers the names of multiple CEC devices even when they are no longer connected.
Restart. Press OK to confirm restart. While your Insignia Roku TV restarts, the screen goes dark for a few seconds, and then displays the startup screen for a few more seconds. When the restart operation is complete, you’ll see the familiar Home screen.
Follow the instructions on the screen to install the system update. Getting updates on a non-connected Insignia Roku TV If your Insignia Roku TV is not connected to the Internet, you can still get system updates by using a USB flash drive and a computer with an Internet connection.
Roku makes the Roku mobile app free for compatible iOS, Android, and Microsoft Windows 8/8.1 devices. With the Roku mobile app, you can control your Insignia Roku TV, find and add new Roku Channels, search and find something to watch, and even use your voice to search without typing. More information can be found by going to http://support.roku.com/home...
Maintaining • Do not use your Insignia Roku TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your Insignia Roku TV works best in temperatures that are comfortable to you.
Insignia Roku TV, then turn it on again. For the latest answers to Frequently Asked Questions, visit General Support & FAQs under the Support and Service section of the Insignia TV support website (www.insigniaproducts.com) and the Support section of the Roku website (www.roku.com).
Page 74
• Make sure that the video cables are connected correctly and good. securely to your Insignia Roku TV. • The video cable(s) you are using may be bad. Try a new set. Picture settings may be • Adjust the brightness. See the TV brightness option in...
Page 75
• Other devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your Insignia Roku TV. Try turning off one device at a time to determine which device is causing interference. After you have...
Insignia Roku TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from your Insignia Roku TV to eliminate the interference.
Insignia Roku TV. TV on with the Roku mobile Insignia Roku TV and • Make sure that your Insignia Roku TV and the mobile app are mobile app not on same I can’t find my on the same network.
• Make sure that the HDMI cable is connected securely to your connected correctly Insignia Roku TV and the device. Volume may be too low • Make sure that the volume on your Insignia Roku TV and the or muted device is turned up and not muted. TV speakers may be •...
Page 80
Roku TV’s information. remote control does not control CEC control may not be • Make sure that your Insignia Roku TV has searched for CEC the device set up correctly devices. See Discovering connected CEC devices on page 63.
32"/55" 1080p, 60Hz, LED Insignia Roku TV Specifications Inputs (both models) 1 (side)/2 (back) Specifications are subject to change without notice. EDID compliant HDMI HDCP compliant Dimensions and weight Component video 1 (back) NS-32DR420CA16 NS-55DR420CA16 Composite video PC/VGA 28.6 × 17.3 × 2.5 in.
Game Mode as broadcast cable. ENERGY STAR qualified Due to the various capabilities of the Insignia Roku TV, as well as limitations in the available content available therein, certain Internet connectable features, applications, and services may not be available on all...
(“You”), on the one hand, and Roku, Television to access or attempt to access any Content outside of the Inc. (“Roku”) and Insignia (“Insignia”) on the other hand (Roku and country or location authorized by Roku or the third party who Insignia collectively referred to as “We”, “Us”...
NS-32DR420CA16/ NS-55DR420CA16 THE TELEVISION IS LICENSED UNDER THE AVC PATENT PORTFOLIO of any Content Provider whose Content You choose to access. See LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A www.roku.com/channels#!now-playing for a list of Content CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC Providers for the Television.
Page 85
(including the operation of the Software incorporated in purposes solely on any mobile device that You own or control and the Television) is provided solely by Insignia as set forth in the as permitted by the usage rules set forth in any application store Important Product Information Guide, and not by Roku.
This Agreement is the final, complete and exclusive agreement BASIS AND NOT AS A PLAINTIFF OR CLASS MEMBER IN between You, on the one hand, and Roku and Insignia, on the other ANY PURPORTED CLASS OR REPRESENTATIVE ACTION OR hand, relating to the Television, the Channel Store, the Software PROCEEDING.
Page 87
32"/55" 1080p, 60Hz, LED Insignia Roku TV IC Statement Dolby License Notice and Trademark Acknowledgement This device complies with Industry Canada licence—exempt RSS Manufactured under license from Dolby standard(s). Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Insignia repair center or store personnel, WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, Insignia will (at its sole option): (1) repair the Product with new or LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR rebuilt parts;...
Need help?
Do you have a question about the Roku TV NS-32DR420CA16 and is the answer not in the manual?
Questions and answers