Table of Contents
Advertisement
Insignia 28" LED TV
Component video (better)
Note
Cables are often color-coded to match color-coded jacks.
On your TV
Component
Audio cable
video cable
connectors
connectors
Component
Analog
video jacks
audio jacks
1 Make sure that your TV's AC power adapter is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the VIDEO/Y, P
the component video out jacks on the cable or satellite box.
4 Connect an audio cable (not provided) to the AUDIO L and R jacks on the side of your TV and to the audio out
jacks on the cable or satellite TV box.
Notes
• The VIDEO/Y, P
• When you connect the audio using the AUDIO L and R jacks, the audio
5 Plug your TV's AC power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
or
to highlight Component/AV, then press ENTER.
16
, and P
B
R
device) share the AUDIO L and R jacks with the VIDEO/Y jack (used to
connect an AV (composite video) device).
output is analog.
www.insigniaproducts.com
Side of TV
video jacks (used to connect a component
Audio cable
Component video
cable
, and P
jacks on the side of your TV and
B
R
Cable or
satellite box
Advertisement
Table of Contents
