Insignia 55" 1080p LCD TV
Installing the stand or
wall-mount bracket
Notes
•
If you plan to wall-mount your TV, do not install
the stand.
•
Store the stand and stand screws in case you
decide to use the stand in the future.
Installing the stand
To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Align the stand with the screw holes in the
stand column, then secure the stand plate to the
stand column with the four provided screws.
Screw type Screw length # of screws
M5
16 mm
4
www.insigniaproducts.com
Installing a wall-mount bracket
Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
"Miscellaneous" on page 48.)
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Remove the four bottom screws that secure the
stand column to the TV, then remove the stand
column.
3 Install the stand cover.
5