Ada MP-1 CLASSIC Owner's Manual page 17

ADA MP-1 Classic owner's manual
TUBE & BATTERY REPLACEMENT
The MP-1 CLASSIC uses a 3-volt Lithium battery which maintain power for program storage
while the MP-1 CLASSIC is unplugged from in AC supply. Expected battery life is 8-10 years.
Should replacement be necessary, contact a qualified service technician.
Your factory installed 12AX7A tubes should last approximately two years. When tube
replacement becomes necessary, we recommend that you use only ADA factory-tested
replacement tubes for the cleanest and quietest performance possible. These can be
obtained from ADA or an authorized ADA dealer. Order ADA part number 800301. For more
information call ADA customer service at (510)532-1512.
TECHNICAL SPECIFICATIONS
TUBE COMPLEMENT
MIDI
CHORUS
INPUT
EFFECTS LOOP
STAGE OUTPUTS
RECORDING OUTPUTS
HEADPHONE OUTPUT
EFFECTS LOOP
VOLTAGE
POWER CONSUMPTION
DIMENSIONS:
WEIGHT
OPTIONS
OPTIONAL
ACCESSORIES
Four stages of gain using two low noise 12AX7A's
Channel 1-16, OMNI, OFF; Program change: 1-128; MIDI
Mapping, full ADA SYSEX implementation
Depth 0 (OFF) to 100. Rate 0.0 sec. to
10.0 sec.
1/4" phone jack, high impedance (1 meg ohm).
1/4" phone jack line & instrument levels
1/4" phone jack line level
1/4" phone Jack Iine level
1/4" stereo phone jack
Stereo effects loop with switchable signal levels and
programmable in/out.
120VAC. 50V/60Hz.
12 watts.
D-10.5", W-19", H-1.75" (1 rack space.)
6 lbs, 8 lbs shipping.
220VAC. 50/60 Hz. Extended 3 year warranty
ADA MIDI foot controllers. Phantom power 7-pin MIDI cable
Page 17 of 18