Download Print this page
Ada T100S Owner's Manual

Ada T100S Owner's Manual

All tube stereo guitar amplifier

Advertisement

Quick Links

T100S All Tube Stereo Guitar Amplifier
OWNER'S MANUAL
Originally written by ADA SIGNAL PROCESSORS, INC. Scanned and edited by Jur at 30th of april 2003. Original
ADA logo edited and rendered by Barend Onneweer of Raamw3rk.) The version of this manual is copyrighted and
may not be sold or placed on a website without permission of the editor.
Release No.1 for
http://www.adadepot.com

Advertisement

loading

Summary of Contents for Ada T100S

  • Page 1 T100S All Tube Stereo Guitar Amplifier OWNER’S MANUAL Originally written by ADA SIGNAL PROCESSORS, INC. Scanned and edited by Jur at 30th of april 2003. Original ADA logo edited and rendered by Barend Onneweer of Raamw3rk.) The version of this manual is copyrighted and may not be sold or placed on a website without permission of the editor.
  • Page 2 ADA T100S owner’s manual CONTENTS Introduction Features Specifications Precautions SetUp Tube Replacement Speaker Impedance Accessories Page: 2 of 6...
  • Page 3: Specifications

    Refer servicing to qualified service personnel. SET UP Check impedance of speaker array to be used with the T100S. If you are using more than one cabinet per side refer to the speaker configuration diagram F on page 10. An overall impedance from 4 ohms to 16 ohms is recommended for maximum performance.
  • Page 4: Tube Replacement

    Pull tubes from their sockets and plug in the new ADA tubes. Carefully pull tube retainers into position. Replace top cover and screws. Note: Tubes are fragile, handle them with care.
  • Page 5 ACCESSORIES For price and ordering information contact your local Authorized ADA Dealer. • Tail mount kit: secures rear panel of amplifier to rack mount rails. ADA part # 800310 • 6CA7 power tube matched set: replacement tube set for one channel. ADA part # 800302 •...
  • Page 6 ADA T100S owner’s manual The ADA SPLIT-STACK speaker cabinet uses two 16-ohm speakers that are wired in parallel, which makes the cabinet an 8-ohm load. Only ADA SPLIT-STACK speaker cabinets offer you the versatility of parallel and series extension ports, allowing you to combine cabinets in various impedance configurations.