Iv-3-4-2. Internal Server - Edimax EW-7679WAC User Manual

Session Timeout
Accounting
Accounting Port
IV‐3‐4‐2. Internal Server
below used when "Internal" is selected for "RADIUS Type" in the "Wireless
Settings"  "RADIUS"  "RADIUS Settings" menu.
To use RADIUS servers, go to "Wireless Settings"
select "MAC RADIUS Authentication"
Authentication" and select "MAC RADIUS Authentication" (see
IV‐3‐1‐3. & IV‐3‐2‐3).
Internal Server
EAP Internal
Authentication
57
Set a duration of session timeout in seconds
between 0 – 86400.
Enable or disable RADIUS accounting.
When accounting is enabled (above), set the
UDP port used in the accounting protocol of
the RADIUS server. Value must be between 1 –
65535.
The access point features a built‐in RADIUS
server which can be configured as shown
Check/uncheck to enable/disable the access
point's internal RADIUS server.
Select EAP internal authentication type from
the drop down menu.

"Security" and

"Additional