Iv-3-3-4. Wds - Edimax OAP900 User Manual

IV-3-3-4. WDS

configured as shown below.
When using WDS, configure the IP address of each access point to
be in the same subnet and ensure there is only one active DHCP
server among connected access points, preferably on the WAN
side.
WDS must be configured on each access point, using correct MAC addresses.
All access points should use the same wireless channel and encryption
method.
Wireless Distribution System (WDS) can
bridge/repeat access points together in an
extended network. WDS settings can be
47